Tamiya F104 Pro!
#4366
Tech Elite
iTrader: (24)
Broke my "High Traction T-Plate" last wked and haven't been able to get it replaced in time for this wked's meeting. So;
Has anyone noticed the differences between the three T-Pates on offer?
The "Kit" T-Plate has a black finish,
The "Soft" T-Plate clear, no finish,
The "High Traction" T-Plate is clear and with a U-shaped slot cut around the tension screw adjustment.
All seem to be made of the same fibreglass material & the same thickness.
So one could just get a Kit T-Plate and dremel out the U slot to convert it to the High Traction Plate, yes?
Any thoughts?
Has anyone noticed the differences between the three T-Pates on offer?
The "Kit" T-Plate has a black finish,
The "Soft" T-Plate clear, no finish,
The "High Traction" T-Plate is clear and with a U-shaped slot cut around the tension screw adjustment.
All seem to be made of the same fibreglass material & the same thickness.
So one could just get a Kit T-Plate and dremel out the U slot to convert it to the High Traction Plate, yes?
Any thoughts?
#4367
Tech Champion
iTrader: (22)
Broke my "High Traction T-Plate" last wked and haven't been able to get it replaced in time for this wked's meeting. So;
Has anyone noticed the differences between the three T-Pates on offer?
The "Kit" T-Plate has a black finish,
The "Soft" T-Plate clear, no finish,
The "High Traction" T-Plate is clear and with a U-shaped slot cut around the tension screw adjustment.
All seem to be made of the same fibreglass material & the same thickness.
So one could just get a Kit T-Plate and dremel out the U slot to convert it to the High Traction Plate, yes?
Any thoughts?
Has anyone noticed the differences between the three T-Pates on offer?
The "Kit" T-Plate has a black finish,
The "Soft" T-Plate clear, no finish,
The "High Traction" T-Plate is clear and with a U-shaped slot cut around the tension screw adjustment.
All seem to be made of the same fibreglass material & the same thickness.
So one could just get a Kit T-Plate and dremel out the U slot to convert it to the High Traction Plate, yes?
Any thoughts?
#4370
Tech Fanatic
iTrader: (67)
I take it you have the f60 chassis so its not the carbon fibre chassis, if you have apparently its still a very good chassis, I'm building my f60 up now
#4371
Tech Master
iTrader: (29)
Its either this thread or the 1/10 R/C F1's...Pics, Discussions, Whatever thread that has some good links to youtube video that give handy building tips, prob a couple of pages back I think
I take it you have the f60 chassis so its not the carbon fibre chassis, if you have apparently its still a very good chassis, I'm building my f60 up now
I take it you have the f60 chassis so its not the carbon fibre chassis, if you have apparently its still a very good chassis, I'm building my f60 up now
#4372
Tech Fanatic
iTrader: (67)
Yep same chassis as far as I'm aware heres the link
http://rcf1blog.blogspot.com/
you may have to go back through his posts but the videos are there and have some very handy hints
http://rcf1blog.blogspot.com/
you may have to go back through his posts but the videos are there and have some very handy hints
#4373
Has anyone used a mini lipo? I'm interested because of the small size/weight
These are the ones I'm talking about:
http://www.rc-mushroom.com/product_i...ducts_id=21170
These are the ones I'm talking about:
http://www.rc-mushroom.com/product_i...ducts_id=21170
#4374
R/C Tech Elite Member
iTrader: (37)
Has anyone used a mini lipo? I'm interested because of the small size/weight
These are the ones I'm talking about:
http://www.rc-mushroom.com/product_i...ducts_id=21170
These are the ones I'm talking about:
http://www.rc-mushroom.com/product_i...ducts_id=21170
Once i put in a normal size LiPo I started driving like I was with my HPI and actually driving good. I was all over the road with the mini lipo
#4375
Tech Elite
iTrader: (32)
Separetoappadekkisetto OP.1278 F104
発売日:2月19日(土)ごろ Release Date: February 19 (Saturday) about
価格(税込み):3,150円 Price (including tax): 3,150 yen
ジャンル:RC Category: RC
ITEM No:54278 ITEM No: 54278
ヘビーウェイトピボットポストセット OP.1281 F104
発売日:2月19日(土)ごろ Release Date: February 19 (Saturday) about
価格(税込み):1,680円 Price (including tax): 1,680 yen
ジャンル:RC Category: RC
ITEM No:54281 ITEM No: 54281
#4376
Tech Champion
iTrader: (22)
Has anyone used a mini lipo? I'm interested because of the small size/weight
These are the ones I'm talking about:
http://www.rc-mushroom.com/product_i...ducts_id=21170
These are the ones I'm talking about:
http://www.rc-mushroom.com/product_i...ducts_id=21170
Low traction = bad
The advantage is you can add weight back to the car, where you want it. Just remember that little battery is about 100g lighter than anything else, and 150-200g lighter than the average 5000 pack
#4377
Tech Elite
iTrader: (24)
I have preordered both of these and will have them for sale.
I am working on getting an online store going on www.f1paintlab.com, I will post the details as soon as I get close to launch.
I am working on getting an online store going on www.f1paintlab.com, I will post the details as soon as I get close to launch.
#4378
Tech Elite
iTrader: (24)
F1 PAINTLAB STORE IS LIVE!!!!!!
My last post inspired me to get something going since time is money and the clock never stops ticking.
The store is now open here
http://www.f1paintlab.com/Site/PAINT...LAB_STORE.html
I should be adding stuff daily, and the more you buy, the more I will stock.
My goal with this is to have anything F1 that you would want on hand and ready to ship.
I will be making lots of announcements in the coming weeks.
Check it out and let me know what you think.
Thanks
The store is now open here
http://www.f1paintlab.com/Site/PAINT...LAB_STORE.html
I should be adding stuff daily, and the more you buy, the more I will stock.
My goal with this is to have anything F1 that you would want on hand and ready to ship.
I will be making lots of announcements in the coming weeks.
Check it out and let me know what you think.
Thanks
#4379
Tech Elite
iTrader: (61)
Thanks guys for ur setup help. i did not try the foam under the pivot spot. was afraide of braking the tplate. the car started out farly well. i got tq by two laps. over the hpi cars. the center shock still seems real stiff. im chewing up the inside and out side of the rear tires. car feels good thro the corner tho. im still really thinking about doing the foam under the piviot screw. we dont run tcs rules.
any one have a soft center spring u can part with let me know
any one have a soft center spring u can part with let me know
#4380
Tech Master
iTrader: (19)
My last post inspired me to get something going since time is money and the clock never stops ticking.
The store is now open here
http://www.f1paintlab.com/Site/PAINT...LAB_STORE.html
I should be adding stuff daily, and the more you buy, the more I will stock.
My goal with this is to have anything F1 that you would want on hand and ready to ship.
I will be making lots of announcements in the coming weeks.
Check it out and let me know what you think.
Thanks
The store is now open here
http://www.f1paintlab.com/Site/PAINT...LAB_STORE.html
I should be adding stuff daily, and the more you buy, the more I will stock.
My goal with this is to have anything F1 that you would want on hand and ready to ship.
I will be making lots of announcements in the coming weeks.
Check it out and let me know what you think.
Thanks