TC-3 gearing the P2K2 motor
#1
TC-3 gearing the P2K2 motor
I have a Associated TC-3 touring car and a Trinity P2K2 stock motor , how do I gear this motor with a 72 tooth 48p spur gear ? Im running on a Med/large asphalt track . any help would be greatly appreciated.
#2
try between 26 and 28. that should give a nice starting place.
#3
And when in doubt, always start with a small pinion. Better to have a slow car than a burnt motor on the first run of the day.
#4
Tech Apprentice
At present I'm running 100/35, 64 pitch, that works out to 7.14. 72/25, 48 pitch, which works out to 7.20.
Hope that helps.
Hope that helps.
#5
Tech Fanatic
25 sounds about right. We geared our GM3 at 72/24 to start and it was right on.