Kyosho Evolva
#616
Tech Elite
iTrader: (2)
Re: camber setting
Originally posted by raceblast
How does one determine whether the camber is set correctly? Do you set the camber such that the tires are all flat after running or you look at the lap time?
Is it ok to set the camber such that the tires will become a bit cone shape after running?
Do you adjust the ride height by pressing the chassis down and let the chassis rebound, or do you lift the chassis up with the front/rear tires are hanging in air and drop the chassis down?
How does one determine whether the camber is set correctly? Do you set the camber such that the tires are all flat after running or you look at the lap time?
Is it ok to set the camber such that the tires will become a bit cone shape after running?
Do you adjust the ride height by pressing the chassis down and let the chassis rebound, or do you lift the chassis up with the front/rear tires are hanging in air and drop the chassis down?
I got your PM and sent one back to you. Sorry for the delay...
#617
Tech Adept
kyosho 500 silicon oil
What weight oil is 500 silicon oil equal to? 40W?
#619
Tech Elite
Thread Starter
Re: kyosho 500 silicon oil
Originally posted by raceblast
What weight oil is 500 silicon oil equal to? 40W?
What weight oil is 500 silicon oil equal to? 40W?
http://www.twf8.ws/new/tech/tip/shock.html
#620
Tech Adept
Re: Evolva parts
Originally posted by Kurly
If your talking about the Ball screws, the parts your looking for are on the FM509 small parts set and FM338BL screw caps.
If your talking about the Ball screws, the parts your looking for are on the FM509 small parts set and FM338BL screw caps.
#621
Tech Regular
iTrader: (2)
Re: Re: Evolva parts
Originally posted by jnims29
I see you are from Chicago. I was wondering where you race your Evolva @?
I see you are from Chicago. I was wondering where you race your Evolva @?
http://www.oneeighthracers.com/
#622
Tech Adept
Yeah, toledo isn't that far for me, i think it is about a 3 hour drive. But, the quality of that track is amazing.
#623
Jnims,
We will be racing in Portage next season. We have a track set up now (at Super-K) but no driver stand. We have a trailer now & are converting it to a driver stand. Come join us and help get things going!
Drove my Evolva after closing the store yesterday... great fun!!!
We will be racing in Portage next season. We have a track set up now (at Super-K) but no driver stand. We have a trailer now & are converting it to a driver stand. Come join us and help get things going!
Drove my Evolva after closing the store yesterday... great fun!!!
#624
Tech Adept
Duneland,
That is great. I can't wait to pick up my Evolva and start racing. Is there still any off-road racinggoing on in the area?
That is great. I can't wait to pick up my Evolva and start racing. Is there still any off-road racinggoing on in the area?
#625
Off-road will be comensing soon at Finishline in LaPorte (indoor). I will dig out my 1/8 buggy for the winter season. Our club was kicked out of Woodland park & is looking for a new site for the off-road track. With any luck, we will be racing both on-road and off-road next season. I think we will alternate venues -- off-road one week, on-road the next. This should help get the turn-outs up and give guys who only race one type a chance to try other tracks.
We have started our indoor micro racing in my store. 1/18 on-road and also 1/18 off-road. That is on Sat. nights.
We have started our indoor micro racing in my store. 1/18 on-road and also 1/18 off-road. That is on Sat. nights.
#626
Re: kyosho 500 silicon oil
Originally posted by raceblast
What weight oil is 500 silicon oil equal to? 40W?
What weight oil is 500 silicon oil equal to? 40W?
#627
Rear Roll Center
Can you change the rear roll center of the evolva ? And if so; is it like the MRX-4 where it has different roll centers like 4.5, 5.5. and 6.5mm ?? Thanks guys.
#629
Re: Rear Roll Center
Originally posted by Roger
Can you change the rear roll center of the evolva ? And if so; is it like the MRX-4 where it has different roll centers like 4.5, 5.5. and 6.5mm ?? Thanks guys.
Can you change the rear roll center of the evolva ? And if so; is it like the MRX-4 where it has different roll centers like 4.5, 5.5. and 6.5mm ?? Thanks guys.
#630
Tech Rookie
Originally posted by SMcpot
Hey guys,
I'm getting one of these beauties pretty soon...anyone who races at Revelation wanna share their setup?
Hey guys,
I'm getting one of these beauties pretty soon...anyone who races at Revelation wanna share their setup?