TommyBlazin

iTrader: (29)

Doesnt matter if its roar legal or not, wich brushless motor, will produce the most!!! Thanks for input guys...on-road pan car application...


Tommy

memix

iTrader: (1)

Probably it will be the 2.5t motor of speedpassion or tekin.
And if you use 3s lipo then it will be really fast.
Imagine the 2.5t sp produce about 13800rpm per volt so with 2s lipo is 13800*7.4 is 102000rpms,
With 3s lipo is 153000 rpms but i dont now if it could hand ell it the speed control and the motor.

SammyZ

iTrader: (138)

55t lathe motor

latemodel13

iTrader: (101)

Some LMT motors Are capable of 1300 watts on 6 cells or 2 cell lipo. I have a 5300 basic that's 700 watts thats too much for any 10th scale.

TommyBlazin

iTrader: (29)

i meant 17.5 motors...thet have a open-class 17.5 and 13.5 class,,how r the duo motors?

TC3MIKE

From my own personal experience I have ran a speed passion 2.5 brushless with a SMC 4000 7.4 pack geared 9.80 FDR. After making 1 or 2 passes down a smoothe tarmac street I melted the solder off the wires of the motor.

flatspunout

iTrader: (38)

2.5 motors are a 5 cell wind...stick to 3.5T and up for 6 cell or 2s lipo.

-rocky b

KHoff7

iTrader: (5)

Duo is currently the fastest

Pablo Diablo

iTrader: (3)

How do you know that?

TommyBlazin

iTrader: (29)

THANX,,trinity, fantom,,etc,,,or are they all the same,, also whats the most powerfull speedo for it, the tekin rs pro///lrp spx?/thanks

liljohn1064

iTrader: (17)

I'd get the Tekin RS ESC with Redline 17.5 combo. Pick up the Hotwire package while you're at it.

lutach

iTrader: (3)

I have a 1.5T 540 motor that has a 18,102Kv. I still haven't fully tested yet. It will only be used for speed runs.