SupermaxxRich

iTrader: (16)

Whats the deal with that bumper???

clmbia45

It's a 705 Lola bumper. I cut the knobs off of it, bolted it belly to belly to the 710 lower bumper, drilled the holes for the screws (I replaced with titanium) and Dremelled the bottom for the screw heads to fit. Have not tried it yet, but cutting up the front of the body will give enough room to fit on the body posts correctly. If you cut the bumper just inside the body line, then it would be ROAR legal.
jack

fmolzer

Looks like a lot of work to get a big piece of plastic under the hood. Sure you need that thing?

clmbia45

It is such a confidence builder! Now consider you're at the Wisconson Dells, at the graduation ball, and all these weekend RC drivers are chasing around these blue eyed babes likes its their first glimpse of heaven (Muslum Not Christian)! Now these girls have been locked up all winter with a winter supply of corn lickker for Poppa and a Bible, and he damn well remembers what HE was after at his graduation Ball. So you take this little chick who was bored by the time the 3rd snow flake fell, watched Sex In The City, The True Story of William Jefferson Clinton, and is horny as the deer they shot for thanksgiving dinner, and you start whispering sweet nothings in her ear with an extra hot breath thrown in, and you ask me If I think I NEED that big thing????!!!!!!

baller360

can anyone here explain to me what a transponder does you know the little red things that people have connected to the front of there serpent bumber.

Marcos.J

iTrader: (239)

it counts your laps!

baller360

can you use it with any transmitter or will it come with the transmitter,reciver and servos as a set?

baller360

also how much does the 730mah 5-cell rechargebal batery pack runs for and where can i get it on the internet for a good price.

jeffreylin

It works with your track, not your radio. It does get power from your receiver though (plug it in channel 3). It never came with a radio--you have to buy it separately. It is about $80. Check with your local track first as not all of them use the same system.

cyba888

Hey what does part #802240 anti-roll bar levers +ecc do? Its mounted on the front right suspension arm, how does it actually work. Dino.tw showed it to me at the track and explained to me what it was but I need to get more precise info as to how to adjust it and all. Thanks for the tip Dino sorry my Mandarin sucks

Thaasman

Is there a novamega KHM 2.1 allready available?????

SupermaxxRich

iTrader: (16)

Is there anybody that can answer my servo question above??

kreidel

iTrader: (2)

It will be fine....I mean you could buy a better one with better specs but that will do just fine.

fmolzer

Solara

iTrader: (17)

I myself saw quite a lot of broken, stripped gear's Hitek Digital servos for steering........I know there are ppl said they are GOOD servo......but I believed what I saw.

If you can actually get a better one for a little more....try the Futaba Digital S9451....it is .10 Sec/60 Degrees @ 6V and 121 oz/in @ 6V.......both data are a lot better then your Hitek...it cost $80 at Tower. Ppl in this thread told me to get this model, of course, if money is no object, you can always get those $100 servso..........also, some PRO racer here are using JR model, I bet they are among the best for 200mm steering.