Serpent 710
Originally Posted by impulsed
thanks for the help sow...but, if i'm reading that right, its $400 for the set, which would be a new 710 wouldn't it?
I'm probably not good enough to even notice a difference now, I'll just run the Impulse and maybe pick up another cheap roller for parts and see where it goes from there
hell, if I bought the 710 now the 720 will be out next month
I'm probably not good enough to even notice a difference now, I'll just run the Impulse and maybe pick up another cheap roller for parts and see where it goes from there
hell, if I bought the 710 now the 720 will be out next month
Tech Regular
Originally Posted by Sow&Steady
Really?
if that's so, i'm going to be amazed!
Tech Initiate
Originally Posted by jag
Where do you live? I have an Impulse Pro sitting in my garage collecting dust.
Originally Posted by impulsed
i'm in georgia
Originally Posted by jag
If you want it and are ever in So. Fla. I will sell it cheap.
Originally Posted by JustRace
The mail system does work between Fla and Georgia
No, I don't think it does...
It may be cost prohibitive to send it.
Tech Master
iTrader: (19)
has anyone seen the new fantini modified megas?? here is the link to the website i saw it on, they look to be pretty good
http://rcxhobbies.com/home.php
http://rcxhobbies.com/home.php
Originally Posted by Xyvern
I just notice when I turn the front tires to the right, the servo arm is hitting the radiotray plate. Did I do something wrong
Check that you're using the right spacers on the servo mounts for your particular servo. Also check that you've assembled the link to the servo horn on the left side (looking from the rear).
I've used Futaba, Sanwa and KO servos on the car without problems.
Originally Posted by Sow&Steady
It shouldn't do that.
Check that you're using the right spacers on the servo mounts for your particular servo. Also check that you've assembled the link to the servo horn on the left side (looking from the rear).
I've used Futaba, Sanwa and KO servos on the car without problems.
Check that you're using the right spacers on the servo mounts for your particular servo. Also check that you've assembled the link to the servo horn on the left side (looking from the rear).
I've used Futaba, Sanwa and KO servos on the car without problems.
Tech Regular
Originally Posted by Orfeous
Do you find it usefull?
Tech Regular
i dont have any S710 but i thought that it might be useful for 710 drivers..?
never wrong with tips and tricks.. stop complaining.. i tried to be nice!
never wrong with tips and tricks.. stop complaining.. i tried to be nice!
Originally Posted by Orfeous
never wrong with tips and tricks.. stop complaining.. i tried to be nice!
Tech Regular
maybe i missunderstood you too
there are a lot of tips on that page.. it can be good to check it out.
there are a lot of tips on that page.. it can be good to check it out.
Orfeous:
Read his bottom lines: there's something about the Dalton Shop!!
Serpent released a new and improved conrod for the ZX12:
http://www.mytsn.com/products/desc.asp?prid=4252
Read his bottom lines: there's something about the Dalton Shop!!
Serpent released a new and improved conrod for the ZX12:
http://www.mytsn.com/products/desc.asp?prid=4252