3LikesTamiya TRF415
10-01-2005, 10:23 PM
Originally Posted by Sushi Boy
Mark running FOAMS!!!!!!!!!?????????
How is the racing up there?
10-01-2005, 11:47 PM
Pretty good!!!!!! Debbie has fresh carpet on the way. We have two brand new indoor asphalt tracks too. I'm still workin on getting the corally dialed in for aspahlt, but on carpet it's sick fast right now. So when you comming back up? Debbie is havign the slugfest Oct 28-30th 
-Korey
-Korey
10-02-2005, 05:55 AM
Tech Master
Today had a race with my MSX...But however,without testing and immediately go racing.Does not yielded very good results.My friend's MSX won the A mains though.I got A7.Not to bad for the 1st try.
Got to do more testing....
Got to do more testing....
10-02-2005, 02:09 PM
For you guys who have your MSX kit fitted already, Was there much weight difference between the MS and MSX ?
10-02-2005, 02:24 PM
does anybosy know the part # and or where i can order outdrives for the shooters spool???
also, whats the biggest spur that can fit on this car?
also, whats the biggest spur that can fit on this car?
10-02-2005, 02:43 PM
Originally Posted by geeunit1014
does anybosy know the part # and or where i can order outdrives for the shooters spool???
also, whats the biggest spur that can fit on this car?
also, whats the biggest spur that can fit on this car?
10-02-2005, 04:57 PM
msx
Originally Posted by viper1
Hi Guys,
Look what the post man brought me:
Cheers
Look what the post man brought me:
Cheers
10-02-2005, 07:24 PM
Tech Regular
Originally Posted by Customworksking
where did u get it I'm still waiting ? hook a brotha up
Hi,
I got it from my local agent(Singapore/Malaysia) same as Ben.C.
Cheers
10-02-2005, 08:26 PM
Tech Addict
iTrader: (5)
Hey tamiya guys. Whats up with the EVO4 MS. Does anybody run this car?
I never here about it.
I never here about it.
10-02-2005, 08:35 PM
Tech Master
iTrader: (28)
Originally Posted by PhatPat
Hey tamiya guys. Whats up with the EVO4 MS. Does anybody run this car?
I never here about it.
I never here about it.
10-02-2005, 08:38 PM
Tech Master
Hi Guys,
My recent post about the race with my MSX.
An unfortunate thing happened...My friend's MSX and mine was full thottling down the long straight,when his motor wire snapped and his MSX was jam into full locks...And unfortunately slamming straight into the rear and saw my brand new MSX air borne. and slapping down onto the wall and the end of the long straights.After that it was totally tweaked after that I've tried all means to undo the damaged done,however not enough.It didn't recover the good balance anymore.
I think it needs a good Overhaul to get it back to shape.
My recent post about the race with my MSX.
An unfortunate thing happened...My friend's MSX and mine was full thottling down the long straight,when his motor wire snapped and his MSX was jam into full locks...And unfortunately slamming straight into the rear and saw my brand new MSX air borne. and slapping down onto the wall and the end of the long straights.After that it was totally tweaked after that I've tried all means to undo the damaged done,however not enough.It didn't recover the good balance anymore.
I think it needs a good Overhaul to get it back to shape.
10-02-2005, 08:50 PM
Originally Posted by PhatPat
Hey tamiya guys. Whats up with the EVO4 MS. Does anybody run this car?
I never here about it.
I never here about it.
10-02-2005, 09:17 PM
Originally Posted by Ben.C
Hi Guys,
My recent post about the race with my MSX.
An unfortunate thing happened...My friend's MSX and mine was full thottling down the long straight,when his motor wire snapped and his MSX was jam into full locks...And unfortunately slamming straight into the rear and saw my brand new MSX air borne. and slapping down onto the wall and the end of the long straights.After that it was totally tweaked after that I've tried all means to undo the damaged done,however not enough.It didn't recover the good balance anymore.
I think it needs a good Overhaul to get it back to shape.
My recent post about the race with my MSX.
An unfortunate thing happened...My friend's MSX and mine was full thottling down the long straight,when his motor wire snapped and his MSX was jam into full locks...And unfortunately slamming straight into the rear and saw my brand new MSX air borne. and slapping down onto the wall and the end of the long straights.After that it was totally tweaked after that I've tried all means to undo the damaged done,however not enough.It didn't recover the good balance anymore.
I think it needs a good Overhaul to get it back to shape.
How are the new aluminum pieces? Do they tweak easy? (The motor/gear area)
10-03-2005, 12:12 AM
Originally Posted by AKARA
How are the new aluminum pieces? Do they tweak easy? (The motor/gear area)
10-03-2005, 01:54 AM
Tech Master
Originally Posted by GT Racer
They are very strong. By the way, that my car that Ben.C hit. The motor wire didn't snap, it's the commutator.
Hope can be sent back to the manufacturer for a replacement comm.
Last edited by Ben.C; 10-03-2005 at 03:30 AM.