What servo for 1/8th scale buggy
10-13-2008, 06:00 PM
#16
it will do the job for th/brake but no good for steering, i have been using Sanwa/Air servo's for 7 years , the high speed servo's are the only ones that have shat on me so now i only use the 94359 for both steer and throttle, .10 is enough speed for th/br and you have the extra torque for braking if needed.. I did have a 94758 sitting around so i have been using it for just over 12 months and it let go on the weekend.. even though the servo i recommended is analog i wont use anything else..
10-13-2008, 06:42 PM
#18
i believe futabas new servos are 352ś
10-13-2008, 07:09 PM
#20
I used a 1313 in my 8ight last season with really good results. It's fast and strong enough to tackle the job.
However, I just tried a Futaba BLS451 and the difference is night and day. The Futaba is simply amazing.
I'd run a regulator with any servo.
However, I just tried a Futaba BLS451 and the difference is night and day. The Futaba is simply amazing.
I'd run a regulator with any servo.
10-13-2008, 07:26 PM
#21
JR 9100T... fast and 320??? oz of torque.
10-14-2008, 01:57 AM
#22
Tech Apprentice
On my MP9, I have the Futaba S9351 (199oz. torque)for both the throtle/brake and steering controlled by the 3PKS with Losi 7.4 lipo and regulator. Steering and Brake is very fast especially when I turn up the ABS brakes. The servo would twitch like its on a badd tripp on Crack. My BLS352 is comming in on Thursday along with my 4PK. Im going to see how the servos going to work out compare to the S9351.
Tin
Tin
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
