TAMIYA F103 RM
#2236
f103 bearing size
Does anybody know what the 3 different bearing sizes are for a F103?
#2238
#2239
Tech Fanatic
iTrader: (8)
Here is how you can use the Losi wheel hex adapter.... all you will need is a hobby knife or a sharp blade of some type.
1.Take the larger peice with the five sided hex
2. With your hobby knife cut off the rounded peice at the base of the hex(just continue to score until cut through until you can remove the rounded part)
3. remove your rear axle
4. Choose your kimbrough spur that you would like to use.
5. Insert diff balls( use the associated balls) you can use 12 diff balls on this instead of having the five or six that Tamiya uses, they will now ride in a different spot on the rings.
6. Take your Kimbrough spur gear and insert the peice that you have just cut off into the bearing hole of the spur gear. You will no longer need the bearing in the middle of the gear......may sound crazy to some of you but this does actually work really well.
7. Now slide the gear over the axle and set your diff. You can now use any gear ratio that you would like be it with a 48p or 64p gear.
8. You will have one of these hex adapters left when you are finished with this project. You can dircard the two other small adapter or do like I did and find someone that runs this truck and gave them to them...LOL and you will also have an extra hex for the spur adapter.
Let me know how this ends up working for you guys.....GOOD LUCK
1.Take the larger peice with the five sided hex
2. With your hobby knife cut off the rounded peice at the base of the hex(just continue to score until cut through until you can remove the rounded part)
3. remove your rear axle
4. Choose your kimbrough spur that you would like to use.
5. Insert diff balls( use the associated balls) you can use 12 diff balls on this instead of having the five or six that Tamiya uses, they will now ride in a different spot on the rings.
6. Take your Kimbrough spur gear and insert the peice that you have just cut off into the bearing hole of the spur gear. You will no longer need the bearing in the middle of the gear......may sound crazy to some of you but this does actually work really well.
7. Now slide the gear over the axle and set your diff. You can now use any gear ratio that you would like be it with a 48p or 64p gear.
8. You will have one of these hex adapters left when you are finished with this project. You can dircard the two other small adapter or do like I did and find someone that runs this truck and gave them to them...LOL and you will also have an extra hex for the spur adapter.
Let me know how this ends up working for you guys.....GOOD LUCK
http://www3.towerhobbies.com/cgi-bin...?&I=LXN137&P=7
or
http://www3.towerhobbies.com/cgi-bin...?&I=LXN136&P=7
Best part is you can use the adapter again and again on other spurs.
#2240
Or just use this spur gear for $4.79 (as posted by robk previously):
http://www3.towerhobbies.com/cgi-bin...?&I=LXN137&P=7
or
http://www3.towerhobbies.com/cgi-bin...?&I=LXN136&P=7
Best part is you can use the adapter again and again on other spurs.
http://www3.towerhobbies.com/cgi-bin...?&I=LXN137&P=7
or
http://www3.towerhobbies.com/cgi-bin...?&I=LXN136&P=7
Best part is you can use the adapter again and again on other spurs.
#2242
where do you guys usually buy tires? and what's the best tires to use on carpet? I will be posting a picture of my F103 ( salvage it from a GT and f102 car) I don't have any manuals so Please LMK if "m missing something.
#2243
Tech Champion
iTrader: (34)
Tamiya F103 Premounts, none better.
They're a little spendy but they wear well and have excellent grip for asphalt or carpet. This is also the tire included with the F103 Anniversary kit.
#2244
Tech Champion
iTrader: (34)
Who's down for F1 racing at WCRC on Sunday the 27th?
Remember we were all invited to do another round of the Ultimate F1 type racing format on that date?
I'm good to go if y'all are too.
I think it's awesome that they cater to us F1 Primadonna's and our need to have it our way or we ain't gonna play attitudes .
Nah, it's an awesome deal all around and I know everyone likes it.
Altho it is the holidays, I'm sure lots of us will have new toys to play with and I'm guessin a bunch of us will be wanting to hit the track?
Remember we were all invited to do another round of the Ultimate F1 type racing format on that date?
I'm good to go if y'all are too.
I think it's awesome that they cater to us F1 Primadonna's and our need to have it our way or we ain't gonna play attitudes .
Nah, it's an awesome deal all around and I know everyone likes it.
Altho it is the holidays, I'm sure lots of us will have new toys to play with and I'm guessin a bunch of us will be wanting to hit the track?
#2245
Tech Master
iTrader: (27)
Join Date: Dec 2003
Location: im 4rm a far away place called 1st
Posts: 1,849
Trader Rating: 27 (100%+)
i think i may go.
#2247
Tech Master
iTrader: (27)
Join Date: Dec 2003
Location: im 4rm a far away place called 1st
Posts: 1,849
Trader Rating: 27 (100%+)
man i finally got my 21.5 so now my 3racing can hit the track!
#2249
Tech Master
iTrader: (27)
Join Date: Dec 2003
Location: im 4rm a far away place called 1st
Posts: 1,849
Trader Rating: 27 (100%+)
hit up the for sale side, or get one of the refurbished novak motors there i think 45 or so.
#2250
Tech Elite
iTrader: (24)
Hey guys,
Merry Christmas, here are some shots of a Sauber that I just finished for a customer. Im not the photographer that my buddy Dish is, but the car turned out nice. I have 4 more cars in progress as I post this, should have some more good stuff to show in about a week.
Enjoy!!
Merry Christmas, here are some shots of a Sauber that I just finished for a customer. Im not the photographer that my buddy Dish is, but the car turned out nice. I have 4 more cars in progress as I post this, should have some more good stuff to show in about a week.
Enjoy!!