OFNA LD3 pro
#137
Tech Apprentice
Phone call to Rockhampton and $24 (AUS) and 24 hrs later and I have a new tank.
Guy told me not to screw it so tightly. Gives the tank a bit of play when it takes a hit.
Thanks for the reply nightmare and sup.
Guy told me not to screw it so tightly. Gives the tank a bit of play when it takes a hit.
Thanks for the reply nightmare and sup.
#138
Tech Master
iTrader: (2)
You don't want to have too much play in the tank. The, the vibration will cause the fuel to foam. Don't try to thread the screws thru the tank. Try placing some o-rings or a really small sliver of fule tubing between the tank and the chasis, then thread the screws in. That should do it
#139
Registered User
The owner of Hong Nor Mr. Wu answering questions for LD-3 at other forums. They are in chinese, but you can ask him in english. LD-3 owners want to ask him questions, let me know. I'll give you his email. They provide great service. BTW, I got my champ from him too.
#140
aku-man, can you ask him for me what associated parts (or even kyosho parts like screws coz the ld3 uses metric screws, etc.) will fit the ld3? as of now, we are having problems with parts as of the moment. the only options we have is to order from hongkong or try our local hobby shop that distributes associated products (and another that distributes kyosho parts) here. it was discussed above that the kyosho centax might work on the ld3 too, i hope the centax of the fw05 would fit coz it is low.. and, any news on your champ kit? thanks!
#141
Tech Master
I know what we need.. some Hong Nor shirts!
My 2 speed nitro rival (that I am currently beating with my LD3 pro) always proudly shows off his (free) Kyosho shirt I'd like a Hong Nor one! hehe
My 2 speed nitro rival (that I am currently beating with my LD3 pro) always proudly shows off his (free) Kyosho shirt I'd like a Hong Nor one! hehe
#143
Registered User
Hong Nor just gave me a free T-Shirt.
Sup, email is [email protected]. you can ask your question to Mr. Wu directly.
BTW, you can get most LD-3 parts at www.nitrohouse.com. They are Ofna dealer.
Sup, email is [email protected]. you can ask your question to Mr. Wu directly.
BTW, you can get most LD-3 parts at www.nitrohouse.com. They are Ofna dealer.
Last edited by Aku-Man; 11-19-2003 at 01:15 AM.
#144
aku-man, am from the philippines so its easier to get stuff in hongkong.. hmm.. will try asking hongnor if they ship parts at retail instead of wholesale.. hope they do (and hopei get it cheaper than at hong kong prices)
#145
Originally posted by Joehwee
Sup: The FW05R and the MTX3 Centax Clutch will fit the LD3, one of my buddy running the LD3 is using it in his car, but I am not to sure whether he have to raise the engine higher.
Sup: The FW05R and the MTX3 Centax Clutch will fit the LD3, one of my buddy running the LD3 is using it in his car, but I am not to sure whether he have to raise the engine higher.
#146
Tech Rookie
Hongnor is testing their new centax now.
They want to improve their bad trust bearing and use fine pitch.
They want to improve their bad trust bearing and use fine pitch.
Last edited by mtx3.tw; 11-21-2003 at 06:46 AM.
#147
Tech Master
How many people have had the thrust bearing fail?
If mine gives problems I may get the "HPI R40 Thrust Bearing 4x9x4MM HPI-B036" one... I have a spare Hong Nor one though
If mine gives problems I may get the "HPI R40 Thrust Bearing 4x9x4MM HPI-B036" one... I have a spare Hong Nor one though
#148
FS: LD3 Pro
Hi,
Anyone interested in buying a BRAND NEW assembled LD3 Pro w/unpaint Stratus body, GRP foam tires.... please let me know. This car is a Taiwanese spec Pro version, and will be shipped from Taiwan. Thanks.
[email protected]
Anyone interested in buying a BRAND NEW assembled LD3 Pro w/unpaint Stratus body, GRP foam tires.... please let me know. This car is a Taiwanese spec Pro version, and will be shipped from Taiwan. Thanks.
[email protected]
#149
Tech Master
How much $$?
They are pretty cheap from HK....
They are pretty cheap from HK....
#150
I'm thinking US$200 + shipping. It has the centax clutch, 3mm chassis, and may be some other options that are not include in the US Pro version. Here's one more pic...