Soldering capacitor on LRP QC3
#1
Soldering capacitor on LRP QC3
Anyone can offer tips/advice and pics to show how they soldered capacitor for the QC3? Thanks
#2
If you have deans plugs you can solder the capacitor on Plug from the ESC and heatshrink the cap between the wires.
You can also solder directly ontop of the battery wires where they connect to the ESC. For capacitors, Positive to Positive, Neg to Neg when connecting.
You can also solder directly ontop of the battery wires where they connect to the ESC. For capacitors, Positive to Positive, Neg to Neg when connecting.
#3
Kail - I have always just soldered the cap straight to the board. Leave enough length on the leads so you can position the cap on the chassis next to the QC3.