TQ Racing SX8
#1786
Tech Regular
I have the older model car, will these gears fit straight in? Do the gears make a big difference in acceleration, comparable to the new generation of cars?
Thanks for your help.
#1788
Hmm ok both my kits have the milled towers. I guess I will have to get the other stuff as upgrades lol! Need a good website listing all the parts and part #'s so we know what to order. Also some setup sheets from you guys already racing would be great if not asking to much.
Thanks man for all the info!
#1790
Gearing Change
Okay I will help with a gearing explanation,When the Losi car came it increased acceleration by lowering the weight.Associated soon followed by lowering the weight but also changing the gearing to Increase the acceleration on a heavier car.
Now most engineers have figure out that you don't have the lightest car to increase the acceleration you can do it with a gearing.
With that being said we have noticed that in some areas the smaller style electric tracks are changing over to nitro racing.So we feel we needed to increase our cars acceleration for those style tracks.
Now most engineers have figure out that you don't have the lightest car to increase the acceleration you can do it with a gearing.
With that being said we have noticed that in some areas the smaller style electric tracks are changing over to nitro racing.So we feel we needed to increase our cars acceleration for those style tracks.
#1791
Tech Initiate
What parts does it take to update the old buggy to new? Can I get a listing of part numbers? Will all the pieces work together or what?
#1792
Tech Master
iTrader: (33)
Look close to the bottom of the page and you will see the lightweight parts and shock towers.
http://www.rcprocenter.net/servlet/t...ing/Categories
http://www.rcprocenter.net/servlet/t...ing/Categories
#1793
Tech Initiate
I can see some are labeled as lightweight, just wondering if someone had all the updated parts in a list? Or just all the ones that say lightweight? And are they compatible with old car. I would like to avoid spending 400 on a new car, but I don't mind spending 100-150 to get it up to date for 2009 with lighter parts (and more spares).
Will there be a conversion kit? That would be nice.
Will there be a conversion kit? That would be nice.
#1794
Here are the part numbers for the updated parts.
Front and/or rear Out-drives - BB2169 (1-Pair)
Center Out-drives - BB2168 (1-Pair)
Bevel Gears, front and/or rear (Lightweight) - BB2170
Pins, Differential, front, center, rear (Lightweight) - BB2171
Carbon Front Shock Tower - BB2175
Carbon Rear Shock Tower - BB2176
Steering Post (Lightweight) - BB2172
That's all I have. The new chassis, from what I've heard, is not out yet.
I'm pretty sure these are all the correct numbers, but it wouldn't hurt to double check with TQ before anyone orders. Mine should be on the way and I will confirm the numbers when they arrive.
Front and/or rear Out-drives - BB2169 (1-Pair)
Center Out-drives - BB2168 (1-Pair)
Bevel Gears, front and/or rear (Lightweight) - BB2170
Pins, Differential, front, center, rear (Lightweight) - BB2171
Carbon Front Shock Tower - BB2175
Carbon Rear Shock Tower - BB2176
Steering Post (Lightweight) - BB2172
That's all I have. The new chassis, from what I've heard, is not out yet.
I'm pretty sure these are all the correct numbers, but it wouldn't hurt to double check with TQ before anyone orders. Mine should be on the way and I will confirm the numbers when they arrive.
#1795
Tech Fanatic
Thank's Richard!
#1796
Tech Initiate
Thats what I am talking about!!
#1797
Anyone have trouble with the bolted hinge pins rubbing the steering servo savers plastic body?? I tried turning them around and they hit the bumper. maybe drumel a little off or leave the stock pins in ??
#1799
Tech Fanatic
I put big washers in front of my hinge pins for 2 reasons. 1) It moves the hinge pin away from the steering post and 2) If you hit a pipe hard enough with the front end it will pull the platic piece out of the front alum bracket.
#1800
Tech Adept
iTrader: (4)
Ah Brian and chill and shannon and any other TQ team driver who plans on coming to the Pro Series Race at Nitro Fever, we raced at Nitro Fever, They Changed the layout for the pro Series race... cool layout, they are turning 33 ,31 second laps...its a fast track,really fun...so get there early so you can get some pratcie because the compatition is good....