TRF414M, 404x, 414, 414X
#451
you don`t need to buy ova sterring system.its based onthe TC3......... its cheaper where your at then buying it here. Champ is a good place been there many times in tokyo.
#452
Usagi...
I have to buy the steering rack from Japan because it comes with an aluminum piece that holds the rack onto the chassis. I cannot just buy the american version, it does not fit without the aluminum piece. You can see from the picture at www.ova.co.jp.
Just called my friend. She is going to try to get it in Osaka since she lives there. I hope someone has it!
I have to buy the steering rack from Japan because it comes with an aluminum piece that holds the rack onto the chassis. I cannot just buy the american version, it does not fit without the aluminum piece. You can see from the picture at www.ova.co.jp.
Just called my friend. She is going to try to get it in Osaka since she lives there. I hope someone has it!
#453
i know that, but ova has made it tc TC3 parts fit........why waste money. Many drivers just hand fit the tc3 steering system here.......I guess it all in what you want to spend or send more
#454
Special parts and hop ups
Usagi,could be cool, if you can post us, wich companys make special parts in Japan for the TRF414 cars and his description, with photo advertisements etc..., could be that possible???
And keep us informed of the results of the TRF drivers???
Thank you very very much!
And keep us informed of the results of the TRF drivers???
Thank you very very much!
#455
Tech Master
iTrader: (1)
Go look at http://www.centralrc.co.jp/
Go under Racy, TA04.
You should be able to see some 414M parts there.
Go under Racy, TA04.
You should be able to see some 414M parts there.
#456
Originally posted by Kenneth Tan
Go look at http://www.centralrc.co.jp/
Go under Racy, TA04.
You should be able to see some 414M parts there.
Go look at http://www.centralrc.co.jp/
Go under Racy, TA04.
You should be able to see some 414M parts there.
#457
hop ups
Is possible to get those parts throught internet???
And Usagi, can u post us another labels that make spacial parts?? i heard that tech is making parrts for the F201 but i canīt translate japanese ))
And Usagi, can u post us another labels that make spacial parts?? i heard that tech is making parrts for the F201 but i canīt translate japanese ))
#458
there will be a few makers posting parts for the f201.sit tight.i take care of it
#459
try putting that page through babelfish... not perfect translation, but you can actually browse through the site. i'm doing it right now, and it does give some weird translation... (for an aluminum plate cover for the 03, it's described as "Each gear securely hold. The multiplier effect of drive efficiency rise and cooling efficiency rise is brought". But after building kits and using products with less than perfectly translated manuals, we should be used to this by now!
#460
translator
Yeah i use the babelfish also , but for example it donīt work on the tech site..., arghh any of you know how to get the Racy parts trought the net????
#461
I'm selling it!! can't take it any more!! have to pay the bills and stuff...I guess I have to stick with te TC3 for now
help me out it's on ebay now!!
http://cgi.ebay.com/ws/eBayISAPI.dll...ndexURL=0&rd=1
help me out it's on ebay now!!
http://cgi.ebay.com/ws/eBayISAPI.dll...ndexURL=0&rd=1
#463
yep
And me the heatsink and the front delring bulkhead!
#464
I called CHAMP R/C yesturday and they have the hop up parts for the 414M/TA04 by Racy. I hope I order the right parts I put the same order in my vender in Hong Kong and LHS. I think I will end up with three sets of these parts!
I ordered delrin front and rear arms, delrin front and rear bulk heads, graphite front brace, and vented motor heat sink. Hope to see it all by next week.
I need a little flex.
I ordered delrin front and rear arms, delrin front and rear bulk heads, graphite front brace, and vented motor heat sink. Hope to see it all by next week.
I need a little flex.
#465
Originally posted by NARU
I called CHAMP R/C yesturday and they have the hop up parts for the 414M/TA04 by Racy. I hope I order the right parts I put the same order in my vender in Hong Kong and LHS. I think I will end up with three sets of these parts!
I ordered delrin front and rear arms, delrin front and rear bulk heads, graphite front brace, and vented motor heat sink. Hope to see it all by next week.
I need a little flex.
I called CHAMP R/C yesturday and they have the hop up parts for the 414M/TA04 by Racy. I hope I order the right parts I put the same order in my vender in Hong Kong and LHS. I think I will end up with three sets of these parts!
I ordered delrin front and rear arms, delrin front and rear bulk heads, graphite front brace, and vented motor heat sink. Hope to see it all by next week.
I need a little flex.
but those parts are that that great! I had a few.......and after a short time they failed. so becareful!!!!!!!!