ptjonesus

iTrader: (2)

I am having a hard time finding parts does the arms and belts from a ta04 or trf415 fit the trf 414m

TVree

Hi PT

I recommend speedtechrc.com for parts; Steve is good at doing all he can to keep Tamiya drivers happy, and usually ships the day he receives the order (quick!). I just bought the SSG chassis plate from him, which is generally pretty hard to find. There is an interesting piece in the 415 thread of someone putting the new Evo 4 suspension kit on a 414, too---interesting.

There are online resources as well; you can do an ebay search with Tamiya 414M as keywords and find some suppliers. Enjoy the car; this chassis is still competetive with many of the more "current" cars out there.

Terry V.

Balugz

iTrader: (16)

TA04 low friction front belt and 415 rear belt can be used on a 414m/414m2.

shevchenko2000

I'm selling TRF414M stuff. have a look at ebay. Seller name "trf_skyline".

weekendracer_uk

Ran my TRF414m2 SSG for the first time on sunday at a local club meeting , now bearing in mind i have not raced for about six months or so i was very pleased how the car went.

I did not get the time i want to do all the work on the car that i wanted but i did manage to install the EVO III suspenion blocks front and rear.

Despite the poor weather and on/off drizzle all day i found the car very easy to drive with the ball diff up front with just abit of understeer turning into the corner. Looking forward to getting some more track time to work on setups and start getting to grips with the car.

yeuc001

hey guys

does anyone has any experience on running foam on carpet with 414m2?

I ran in stock class and I am struggle to keep up with tc3 and xray
I really want to beat them in tamiya power.

please help
I am running front and rear diff with center oneway. b/c I could find parts to replace my center one way yet.
The car is sliding all over the place. conern turn in is great but it lost itself in the middle. I am suspecting it is the center one way but I am not really sure.

thanks guys

Shane Reinink

iTrader: (96)

I just bought a TRF414M2 car used to compete in the TCS race up at Trackside at the end of the month. does anybody have any set-ups to use on this car? I have taken a few that were listed on here but was hoping to find more. It would be for the GT1 class which is 19t motor and rubber tires. In case nobody has been to trackside it is a indoor carpet track that has very high traction. Any help would be great.

Csaari77

iTrader: (35)

Does anyone know where to find a chassis plate for a 414mII? I can't seem to find one anywhere. Also, will the suspension blocks from and Evo IV work on a 414. What is the difference between the blocks in roll center? Any help would be appreciated.

GReddy

iTrader: (4)

http://www2.towerhobbies.com/cgi-bin...5&I=LXETH1&P=K

http://www.speedtechrc.com/store/ebp...?catmainid=248

Kevin CBR

iTrader: (11)

Csaari77 - YGPM....

Csaari77

iTrader: (35)

Is there a low friction belt for the rear end? I know that you can use the LF from the Ta04 in the front. If there is, what is the part number?

odawg315

http://www.speedtechrc.com/store/ebp...nid=246&id=457

in case your intrested you can also run a dj pro mod on the 414, and these are an awsome buy.

http://cgi.ebay.com/ws/eBayISAPI.dll...981588591&rd=1

weekendracer_uk

The low friction rear belt from the 415 is the same size , i use one on my 414mII.

Part No# 53707

odawg315

csaari, i saw you placed a bid on those, i have them on all mine, they lighten the car up quite a bit and look awsome, just so you know that whole set still available in japan goes for about $155 new. good luck.

odawg315

weekend i didnt know that, i have a 415 belt left ill hafe to use it!