HACKER BRUSHLESS MOTORS
#469
Tech Regular
iTrader: (1)
the motors beeps when hitting the throttle, and not turning. it heats up around 10 seconds. like the thing is shorted or something. and my ESC is blinking and the protection triggers and resets the ESC. I tried another brushless motor with a removable sensor and its working fine. so I guess its a problem with the motor. Im not sure if its on the sensor wire or on the motor itself.
do you know the contact number or email? thanks.
#470
Tech Elite
iTrader: (1)
the motors beeps when hitting the throttle, and not turning. it heats up around 10 seconds. like the thing is shorted or something. and my ESC is blinking and the protection triggers and resets the ESC. I tried another brushless motor with a removable sensor and its working fine. so I guess its a problem with the motor. Im not sure if its on the sensor wire or on the motor itself.
do you know the contact number or email? thanks.
do you know the contact number or email? thanks.
Phone: 480-726-7519
#471
Tech Elite
iTrader: (117)
I just got a used Hacker motor that I plan to run in my s400 touring car.
Just wondering what you guys recommend for gearing and for timing
Ive heard you wanna max out the timing on the motors. - What direction should I turn the sensor to increase timing and how far should I go?
Im gonna start with leaving the timing where it is and seeing how much I can get out of it just adjusting timing on my Speed Passion controller
Just wondering what you guys recommend for gearing and for timing
Ive heard you wanna max out the timing on the motors. - What direction should I turn the sensor to increase timing and how far should I go?
Im gonna start with leaving the timing where it is and seeing how much I can get out of it just adjusting timing on my Speed Passion controller
#472
I just got a used Hacker motor that I plan to run in my s400 touring car.
Just wondering what you guys recommend for gearing and for timing
Ive heard you wanna max out the timing on the motors. - What direction should I turn the sensor to increase timing and how far should I go?
Im gonna start with leaving the timing where it is and seeing how much I can get out of it just adjusting timing on my Speed Passion controller
Just wondering what you guys recommend for gearing and for timing
Ive heard you wanna max out the timing on the motors. - What direction should I turn the sensor to increase timing and how far should I go?
Im gonna start with leaving the timing where it is and seeing how much I can get out of it just adjusting timing on my Speed Passion controller
Canyon
#473
Novak 10.5 Vs. Hacker 10.5
I am new to electric however not new to racing. I currently have a Novak 10.5 b/c almost everyone here at my club runs Novak, Why I have no idea.
When I came across this thread I began thinking are these just numbers or are the Hacker motors really faster?
Novak 10.5
Watts: 280+
Rpm:4000+
Hacker 10.5
Watts 400!
rpm 3000+
I'll be purchasing a NEW motor soon any info will be greatly appreciated
When I came across this thread I began thinking are these just numbers or are the Hacker motors really faster?
Novak 10.5
Watts: 280+
Rpm:4000+
Hacker 10.5
Watts 400!
rpm 3000+
I'll be purchasing a NEW motor soon any info will be greatly appreciated
#474
Tech Elite
iTrader: (117)
I am new to electric however not new to racing. I currently have a Novak 10.5 b/c almost everyone here at my club runs Novak, Why I have no idea.
When I came across this thread I began thinking are these just numbers or are the Hacker motors really faster?
Novak 10.5
Watts: 280+
Rpm:4000+
Hacker 10.5
Watts 400!
rpm 3000+
I'll be purchasing a NEW motor soon any info will be greatly appreciated
When I came across this thread I began thinking are these just numbers or are the Hacker motors really faster?
Novak 10.5
Watts: 280+
Rpm:4000+
Hacker 10.5
Watts 400!
rpm 3000+
I'll be purchasing a NEW motor soon any info will be greatly appreciated
#475
Tech Regular
iTrader: (1)
#477
The plex has some. Call me tomorrow. (402) 498-8888
#479
My 13.5 E40 New Sensor Plug type, Posted Back To Germany because of defective Rotor (Sintered rotor bits comes off)
First Impressions about service is good...
But I will Let you know the Rest soon
Fingers Crossed
First Impressions about service is good...
But I will Let you know the Rest soon
Fingers Crossed