SWTour

iTrader: (9)

I'm looking for some info for a couple of our new On-Road racers...

We've gone from 27t Brushed to 13.5 Brushless for our On-Road Touring cars.

This is asphalt/rubber tire racing...fairly technical track.

What should these guys be looking at for Roll-Outs with the B/L vs the Brushed 27t's.

(Someplace close would be a good amount of help)

P2

iTrader: (15)

Start at 4.0 FDR and go from there. Just watch the motor temps

syndr0me

iTrader: (32)

40mm should put you in the ballpark, give or take a bit. I think I end up somewhere around 42mm with mine using LiPo, and on carpet. If you guys are running NiMH, you might start around 39 and work it around from there.

RaceAce701

iTrader: (87)

i ran a 27mm rollout with a monster stock and went up to a 40mm rollout with the novak 13.5 and it was right on

SWTour

iTrader: (9)

Thanks guys - I will pass this info on this weekend... It should prove very helpful!~

P2

iTrader: (15)

Disregard my previous post...I thought you were asking for 17.5 info....my bad