ElliotCanada

Lou's Speedway is switching to a new layout for Wednesday Night - the New Circuit #9. The SCAR / World GT Racing League meets Wednesday Nights for great 8 Minute Races.

We run SCAR which runs Novak 25.5 Brushless Motor / Novak Havoc / GTB ESCs / Orion 2400 Lipo / WGT Spec Tires against World GT powered by 17.5 Single Cell Open ESC Spec Tires Heads Up for some great 8 minute races.

200mm CRC GenX10 is the most popular chassis.

Here are the Best Runs form Lou's Speedway Circuit #8
Best SCAR / World GT Challenge Performances:
Best SCAR / World GT Challenge 8 Minute Runs
1 John Elliot CRC Prelude 46 8.03469
2 Lou Vanderwey CRC Supra 46 8.03996
3 John Elliot CRC WGT 46 8.08545
4 Mark Graham CRC Supra 45 8.01129
5 Brian Wynn CRC WGT 45 8.01479
6 Etienne ASC BMW 45 8.03793
7 Carlo Roman CRC WGT 44 8.02736
8 Grant Galloway CRC Mustang 44 8.06168
9 Kevin Hill CRC Porsche 44 8.07143
10 Jeff Corsaut CRC Honda 44 8.07785
11 John Hoy CRC Mazda 44 8.12299
12 Adam Hutchinson CRC Porsche 43 8.00137
13 Ryan Fox XRAY Prelude 43 8.00889
14 Chris Hewitt CRC Porsche 43 8.01053
15 Steve Pascoe CRC Porsche 43 8.06617
16 Jamie Barrett CRC Porsche 43 8.07531
17 Alex Nelles XRAY Porsche 43 8.10844
18 Bart Garner CRC Prelude 43 8.11607
19 Kurt Swayzee CRC Porsche 43 8.12416
20 Steve Fowler XRAY WGT 42 8.01826
21 Dan Engelbreth CRC Porsche 42 8.01921
22 John Watkins CRC Prelude 42 8.02513
23 Brian Crozby CRC Supra 41 8.01251
24 Gabe Marcelli CRC BMW 41 8.02292
25 Aaron Thaler CRC Mustang 41 8.03380
26 Steve Silva CRC Prelude 41 8.08111
27 Kevin Parsons CRC Prelude 40 8.03392
28 Ryan Parsons CRC Toyota 39 8.02728
29 Bob Nelles ASC Prelude 38 8.07593
30 John Deluce CRC Mustang 37 8.12155
31 Brian Fife XRAY Supra 6 1.48613

Best SCAR / World GT Laps - Circuit 8
1 Lou Vanderwey CRC Supra 10.074
2 Mark Graham CRC Supra 10.093
3 Brian Wynn CRC WGT 10.102
4 Etienne ASC BMW 10.246
5 John Elliot CRC WGT 10.280
6 John Elliot CRC Prelude 10.300
7 Carlo Roman CRC WGT 10.404
8 Kevin Hill CRC Porsche 10.471
9 Grant Galloway CRC BMW 10.543
10 Jeff Corsaut CRC Honda 10.571
11 Jamie Barrett CRC Porsche 10.636
12 Steve Pascoe CRC Porsche 10.647
13 Alex Nelles XRAY Porsche 10.648
14 John Hoy CRC Mazda 10.654
15 Brian Crozby CRC Supra 10.677
16 Chris Hewitt CRC Porsche 10.702
17 Bart Garner CRC Prelude 10.744
18 Ryan Fox XRAY Prelude 10.746
19 Steve Fowler XRAY WGT 10.751
20 Adam Hutchinson CRC Porsche 10.777
21 John Watkins CRC Prelude 10.853
22 Kurt Swayze CRC Porsche 10.894
23 Dan Engelbreth CRC Porsche 10.907
24 Gabe Marcelli CRC BMW 10.976
25 Bob Nelles ASC Prelude 11.071
26 Aaron Thaler CRC Mustang 11.110
27 Kevin Parsons CRC Prelude 11.234
28 Steve Silva CRC Prelude 11.252
29 Ryan Parsons CRC Toyota 11.413
30 John Deluce CRC Mustang 11.536
31 Brian Fife XRAY Supra 13.826

Best SCAR / World GT Average Laps over 8 Minutes
1 John Elliot CRC Prelude 10.51
2 Lou Vanderwey CRC Supra 10.52
3 John Elliot CRC WGT 10.62
4 Mark Graham CRC Supra 10.69
5 Brian Wynn CRC WGT 10.70
6 Etienne ASC BMW 10.75
7 Carlo Roman CRC WGT 10.97
8 Grant Galloway CRC Mustang 11.05
9 Kevin Hill CRC Porsche 11.07
10 Jeff Corsaut CRC Honda 11.09
11 John Hoy CRC Mazda 11.19
12 Adam Hutchinson CRC Porsche 11.17
13 Ryan Fox XRAY Prelude 11.18
14 Chris Hewitt CRC Porsche 11.19
15 Steve Pascoe CRC Porsche 11.32
16 Jamie Barrett CRC Porsche 11.34
17 Alex Nelles XRAY Porsche 11.41
18 Bart Garner CRC Prelude 11.43
19 Kurt Swayzee CRC Porsche 11.45
20 Steve Fowler XRAY WGT 11.47
21 Dan Engelbreth CRC Porsche 11.47
22 John Watkins CRC Prelude 11.49
23 Brian Crozby CRC Supra 11.74
24 Gabe Marcelli CRC BMW 11.76
25 Aaron Thaler CRC Mustang 11.79
26 Steve Silva CRC Prelude 11.91
27 Kevin Parsons CRC Prelude 12.08
28 Ryan Parsons CRC Toyota 12.38
29 Bob Nelles ASC Prelude 12.83
30 John Deluce CRC Mustang 13.30
31 Brian Fife XRAY Supra 28.10

RossoTorro

iTrader: (1)

Great looking rides though! Good work!

GenX10_CLR

thanks,

perhaps I have some more to show ;-)

__

which brushless-engines are you using for asphalt outdoor tracks?

drivers here tend to use 4-5.5turn engines

wanna update my car ;-)
new year - new gear

looking for this combo:
LRP Sphere Competition (Brushless+Brushed)
Vector X12 BL Modified -> 4.5 to 5.5 (maybe the octawind)
and some new lipo´s like
LRP LiPo Akku RC Auto VTEC 7.4 Volt 5300 mAh 30C

(yes I like LRP - never had problems with it/ but I am open for other brands)

does someone use a similar combo?

i know it will be even faster then before ;-)
I know the speed from my serpent 1/8 - so that´s nothing to worry

target :
outdoor tracks (230-330 meters length)
scaring nitro and the rest of the world
having fun :-P


greetzzz

GenX_CLR

Michal101

iTrader: (13)

Another place is McAllister bodies...believe it or not. I did not know that they had a ton of GT and ProtoType bodies for both 190 mm and 200mm. I just order a couple of bodies today. Check them out here:

http://www.mcallisterracing.com/racing/

I hope this helps.

BTW, I am not sponsored by them or have any affiliations.

JEFFs SC10

iTrader: (15)

I can't wait to drive mine for the first time, just needs a Tekin ESC and a radio , well I got a radio to get it going, just need a Tekin,

GenX10_CLR

any suggestions for engine/electronics?

5.5 turn brushless

speed controll should have automatic brake, launch controll , perhaps anti lock braking ;-)

want to burn lap-records into the tarmac

"club-legal" would be a bonus ;-)

sphere-competition-tc-spec-brushless-brushed
GM-GENIUS 120 BRUSHLESS
-> any experience with these speed-controllers ?

greetz

GenX_CLR

JEFFs SC10

iTrader: (15)

5.5?

That shits gonna fly!!

GenX10_CLR

don´t think so ;-)

1/8 nitro´s hitting 120km/h usually don´t fly

perhaps you use another competitor as a ramp or hitting a curb badly ...

so 1/10 are lighter - but there is ONE thing to solve this problem : DOWNFORCE


greetz

ghiro

GM's Genius is the smoothest and more complete Esc you can find around,i'm using a Genius120 GenII with a 235mm. Corally Link with a 8T/6T Delta motor but using this car only for the fun of plaiyng, i want the best for it regardless of regulations and i choose this Esc after having tried many others.
I also have an XRay X10Link i'm using for Racing with a Speed Passion Cirtix 13.5 because of some stupid rules that requires exclusivelly the use of this controller but during test drives i rather use a Tekin RSpro with a 10.5.
You can find all of the features you are looking for in both esc's but the differences between the two are huge,mostly in erogation and programmable features. The German esc is way more smooth have more options and takes out more from motors running them cooler too. It's harder to use the Programming software on the GM but is more complete and have more programmable features.Inboard telemetry and porgramming card are also other features offered from the GM that are missing to the RSpro.
Don't get me wrong i'm a great supporter of Tekin products (i own four Tekin esc's and a couple of GM's) but when it comes the need of a smooth throttle control nothing is better than a Genius.

GenX10_CLR

thanks a lot

so the gm offers the best package
and programming is fun, too ;-)

connecting 2 favourite hobbies -> PC and R/C

__

what engines would you recommend ?

someone tried the "lrp x12" or the "gm pro" ?


greeetz
GenX_CLR

ghiro

Cannot say it since i don't know how big are the tracks you are driving,and our cars are so different. I wouldn' t suggest using a CRC with anything lower than a 10.5. the best i can say is get a delta wound motor and feel the difference ( GM's and Corally) a 12T GM delta is equal to a 6.5 star,figure it by yourself about an 8T delta is about. I personally don't like LRP motors after some very bad experiences in sedan class (read it: "thermal"). GMpro are good motors some are etter for 4wd's and others are more suited to 2wd's,there are also some delta's in that line of products perfect for any scale pancar.

GenX10_CLR

I just read the first pages of the gm esc manual ;-)
there is a rev. (rpm) limiter and so on

so I think I can give the 5.5T or something in this class a try and set a rev-limit if necessary ;-)

search in youtube for :
Pro10 Bamberg 3rd SM Lauf 2009 1st A-Final
or
Norispokal 2010
or
Roll-Out XRAY NT1 beim MAC-Nürnberg

so you get a feel for the type of tracks I wanna go ;-)


greeetz
GenX_CLR

PS:
first track I drove my indycar/ xray/ pro3 with 2speed gearbox - what a day that was :-)
second track I drove my serpent950 ;-)

ghiro

well i've seen now we are from the same part of the planet: easier to understand your driving needs,sure you wont use this thing with a single lousy cell. . .
I believe your best choice is some thing like a GMpro 9T Delta and a good pack of 50C 2S.
Until your cars axle can take it ,it'll be a good experience. My previous CRC 235 couldn't take a cheesy Novak 7.5L in Lostallo track
http://www.youtube.com/watch?v=2Mcz1T3nd5M (these are 200mm's 13.5's, the class and championship i race)

GenX10_CLR

woooot fullHD ?!?!!!

have to beat our guys ^^


ok
I´ll think about what you wrote ;-)

thanks

greeetz
GenX_CLR

tudor_47

What type and brand of rear axle do you suggest using for a 200/235mm x10-link?
Also do you know of a rear pod that can be used with the X10.link that can house 48pitch spurs and pinions?

Nice video! Makes me want summer even more than before.