Puerto Rico Latin Cup 2008!!!
02-08-2008, 03:50 PM
#16
ok thanks for all the help one last question i have a 2 1/2" holes cut in the front and rear windows for cooling is that ok?
i have a transponder as we run on times here and quantity of laps.
just some info on our racing and track our track is 814 feet long in driving line 10 feet wide our stright is 250 feet long with a sweeping bend at one end and the other end a 90 turn.
we run 10 minute races and this gives us 25-26 laps with two pit stops time is around 21-23 seconds per lap.
check our web site at http://www.roarbarbados.org/ we are still putting pics on
brian
i have a transponder as we run on times here and quantity of laps.
just some info on our racing and track our track is 814 feet long in driving line 10 feet wide our stright is 250 feet long with a sweeping bend at one end and the other end a 90 turn.
we run 10 minute races and this gives us 25-26 laps with two pit stops time is around 21-23 seconds per lap.
check our web site at http://www.roarbarbados.org/ we are still putting pics on
brian
02-08-2008, 04:14 PM
#17
Tech Regular
We use as ROAR says 60mm in front and no limit on the rear. It must keep the window shape, but you can cut it.
02-08-2008, 05:19 PM
#18
ok thanks i will have to look at the rules i have as i am also a member of ROAR in the US.
I drive a mugen mtx4r 1/10th with an O.S .12 EB and O.S pipe 5mm stinger with a dodge stratus or a dna body and a mrx4r 1/8ih with a ninja engine and pipe. can i drive the 1/10th above in outlaw?
you do not have electric running?
is 30% fuel used and is there a time that we must meet as to let you know if we are coming and how many?
on tires what shore do you use i have Kysoho 40 front and rear.
what is the hotel rates that are close to the track?
brian
Mugen
MTX4R
MRX4R
I drive a mugen mtx4r 1/10th with an O.S .12 EB and O.S pipe 5mm stinger with a dodge stratus or a dna body and a mrx4r 1/8ih with a ninja engine and pipe. can i drive the 1/10th above in outlaw?
you do not have electric running?
is 30% fuel used and is there a time that we must meet as to let you know if we are coming and how many?
on tires what shore do you use i have Kysoho 40 front and rear.
what is the hotel rates that are close to the track?
brian
Mugen
MTX4R
MRX4R
If you need Mugen Parts, we will have a good stock for the race.
Best Regards.
02-08-2008, 06:20 PM
#19
thanks to all for your help i will keep looking at the forum
mugen does not break easy so i hope to need parts but i thank you
mugen does not break easy so i hope to need parts but i thank you
02-09-2008, 09:48 AM
#20
we use the AMB timing system that uses a bridge can this work with you if not can we buy then when we get there?
check it here http://www.rclapcounter.com/
check it here http://www.rclapcounter.com/
02-11-2008, 05:52 AM
#21
Tech Regular
Yes, we use AMB compatible system
02-11-2008, 07:02 AM
#22
hey Edgar it will be cool if the Barbados Racing club join us on the latin cup and after the latin cup we join them in Barbados, what did you think???
02-11-2008, 10:06 AM
#23
JRGTR we have been just given land to build a track so we are in all minds on this but we will be still using old one
02-11-2008, 10:06 AM
#24
JRGTR we have been just given land to build a track so we are in all minds on this but we will be still using old one.
this is the track we are going to build.
this is the track we are going to build.
02-11-2008, 12:42 PM
#25
Hey nice layout, I guess It is open for a few layouts about 3 or 4?
hope you complete that track!!! and invite us to join the opening!!!
hope you complete that track!!! and invite us to join the opening!!!
02-11-2008, 12:51 PM
#26
Hey nice layout, I guess It is open for a few layouts about 3 or 4?
hope you complete that track!!! and invite us to join the opening!!!
hope you complete that track!!! and invite us to join the opening!!!
02-23-2008, 11:39 AM
#27
Entry Form
This is the entry form for the Latin Cup. Print and send by mail before established date.
02-23-2008, 12:01 PM
#28
02-23-2008, 02:39 PM
#29
really didnt think there were any puerto ricans on here guess i was wrong
glad to see i'm not the only pr in the rc world.
glad to see i'm not the only pr in the rc world.
02-23-2008, 03:55 PM
#30
hmm
good luck ANDY BAEZ hope i spelled right im sure youll be there 