g12314

iTrader: (6)

Translation: Yes, I'll have shrimp fried rice w\ order of Egg ROLL to go.

Ermer appears to be the man you want to talk to about getting TA05's dialed in . I'm sure he'll be at the track this weekend with us for the Hurricane Race

Jimmy

cwoods34

iTrader: (10)

IndyRC that proves a great point, but I'll be REALLY impressed when you add a stock E10 to that list

IndyRC_Racer

iTrader: (9)

I like a good challenge, but I'm not sure I'm up to racing a totally stock HPI E10 in VTA. I've already bought an aluminum center shaft and I have my eye on aftermarket shock towers and steering rack. I'll probably setup droop through shock limiters, but I still have to figure out a way to set camber and toe-in with the stock parts. Also the max FDR with the stock spur is 4.7, so I'll either under gear a 21.5 or go with 4-cell/27t.

BadSign

iTrader: (15)

It's only a matter of time. Then the radio shack chassis will come...

G_Anders

Looking to see what everyones running on carpet as far as setup, my car is loose and cant find out why. I have a few questions below

What wt oil in front and rear?
Springs in the rear?
Springs in the front?
rear shocks leaned in at about?
front shocks leaned in at about?
ride height fully loaded
droop, _ mm below ride height front, _ mm below back
font toe?
rear toe?
camber front and rear
caster in front and rear

Turbonium

iTrader: (27)

yea, i was at the Novak race also... and like Ermer said, i didnt see any VTA car that wasnt 21.5/lipo... not that there might not have been, but i didnt see any.

spirit of VTA... ill add my contribution:

i made sure the wheels and tires were shimmed out to look right with the front and rear flares, not giving a rats a@# what it would change on the handling... along with the "Junkyard Reject" look, with mismatched body parts, "faded" blue paint, and primer on the rear quarter...




had a great time, running VTA at a large race, just happy to have made the A, much less starting 5th on the grids. now, i need to practice my rolling starts for next time.

Scooby Horton1

jon Perkins

iTrader: (4)

I take it you did not like my question....LOL... Just did not realize when asking a general question about motors for the vta that it would get sum panties bent out of shape.

chicagokenji

If panties are being "bent" that would be pretty gross.

TwoTone

iTrader: (12)

It's not panties getting bent out of shape. I think it's more to do with any board in general. Someone comes on and asks a question that has already been asked and answered 10 times on the very thread so regular readers of the thread are plain sick of the question.

All the poster had to do was spend a few minutes and reading through the thread to see if it's been answered first.

KE4PJO

LOL, anybody can do it that way.

liljohn1064

iTrader: (17)

I can read... sort of.

DARKSIDE

iTrader: (2)

repeat...til it sticks.....thank you for your time....

liljohn1064

iTrader: (17)

Its funny because Scooby asks that question once a page just to keep us on our toes.


Scooby, where's the pics of your TA car?

chicagokenji

For anyone waiting on Novak Havok and the 21.5 combo Tower has it now, today, listed as available:

http://www3.towerhobbies.com/cgi-bin...&I=LXWLX1&P=ML

$150 bucks

I wonder if that means hobbyshops will also be getting their backorders in too?