Hpi Pro 4
#946
Tech Initiate
Atsushi Hara and Masayuki Miura tested their Pro4 with Orion Rubber tires in Switzerland this week, with others Team Orion/Peak drivers (Reinhard, Spashett, Jean-Marc Betticher and Oscar Jansens). It was a training for the DHI Cup. You can see reports (and pictures from Pro4 ;-) ) on these three internet sites:
- Swiss R/C
- R/C World.ch
- Over R/C
I was very impressed, but they are very approachable and nice people
- Swiss R/C
- R/C World.ch
- Over R/C
I was very impressed, but they are very approachable and nice people
#947
which rear suspension block is better suited for carpet?
2.5 or 3 degrees?
also, which type of springs are good for rubber on carpet? a hard spring setup or soft?
any help would be appreciated.
Thanks!
2.5 or 3 degrees?
also, which type of springs are good for rubber on carpet? a hard spring setup or soft?
any help would be appreciated.
Thanks!
#948
Originally posted by racer
which rear suspension block is better suited for carpet?
2.5 or 3 degrees?
also, which type of springs are good for rubber on carpet? a hard spring setup or soft?
any help would be appreciated.
Thanks!
which rear suspension block is better suited for carpet?
2.5 or 3 degrees?
also, which type of springs are good for rubber on carpet? a hard spring setup or soft?
any help would be appreciated.
Thanks!
I`d use in my FTTC3 2.5 (with Losi parts) if carpet grip is ok and track is bigger than usually and 3.0 when grip is weaker and track is quite small, because if you use that 3.0 block in good grip track it cause that you overheated your rear wheels after three minutes.
We use our club track cs-27 (EFRA rule) tires so soft spring set-up is naturally better
Who else order Pro4 from Speedtech?
Last edited by Trinity2; 01-11-2004 at 01:41 AM.
#949
DHI Cup 2004
Results after 4 qualifier run:
1. Atsushi Hara HPI Pro4
2. Marc Reinhard
3. Andreas Myrberg
So far so good
1. Atsushi Hara HPI Pro4
2. Marc Reinhard
3. Andreas Myrberg
So far so good
#951
...
Sorry, wrong button
#952
DHI CUP:
first a-main: hara passed marc rheinard in the last round an won the first a-main.
he also won the second a-main!
first a-main: hara passed marc rheinard in the last round an won the first a-main.
he also won the second a-main!
#953
hi.
is there any official website about the dhi race?
cheers!
is there any official website about the dhi race?
cheers!
#954
Tech Adept
Pro 4 with twister
#955
Tech Adept
more
#956
Hara also won the third Final in front of Steen Graversen, Marc Rheinhard and Myrberg!
Great race of Hara with PRO 4 and the Tamiya Team with their brandnew TRF 415!
Great race of Hara with PRO 4 and the Tamiya Team with their brandnew TRF 415!
#957
First victory
Hei zombie!! Here you are, the first victory to new Pro4 and Hara
Way to go...
Way to go...
#958
Originally posted by chaini
hi.
is there any official website about the dhi race?
cheers!
hi.
is there any official website about the dhi race?
cheers!
#959
Originally posted by Kingcrab
Pro 4 with twister
Pro 4 with twister
#960
Thanks for your input Trinity2
Originally posted by Trinity2
I`d use in my FTTC3 2.5 (with Losi parts) if carpet grip is ok and track is bigger than usually and 3.0 when grip is weaker and track is quite small, because if you use that 3.0 block in good grip track it cause that you overheated your rear wheels after three minutes.
We use our club track cs-27 (EFRA rule) tires so soft spring set-up is naturally better
Who else order Pro4 from Speedtech?
I`d use in my FTTC3 2.5 (with Losi parts) if carpet grip is ok and track is bigger than usually and 3.0 when grip is weaker and track is quite small, because if you use that 3.0 block in good grip track it cause that you overheated your rear wheels after three minutes.
We use our club track cs-27 (EFRA rule) tires so soft spring set-up is naturally better
Who else order Pro4 from Speedtech?