Novak Millenium charger questions
#46
.
Originally posted by Grizzbob
Just to help clear things up some, I do use an original Millenium(not a Pro) version 1.20, & I do use the Linear NiCd charge mode for my NiMh cells, including my packs of GP3300's. I've used everything from a 5mV per cell to a 9mV per cell threshold, & I've seen no problems that way(I've seen SMC actually recommend using a 9mV threshold, that's when I first tried it). The packs get just a bit warm, just like you'd want(not too hot & not cold) & they run just fine on track. What's also nice is that a 9mV threshold also works well for Sanyo 3000HV's(which I still have some packs of), so I don't have to change it over to do any of my NiMh packs....
Just to help clear things up some, I do use an original Millenium(not a Pro) version 1.20, & I do use the Linear NiCd charge mode for my NiMh cells, including my packs of GP3300's. I've used everything from a 5mV per cell to a 9mV per cell threshold, & I've seen no problems that way(I've seen SMC actually recommend using a 9mV threshold, that's when I first tried it). The packs get just a bit warm, just like you'd want(not too hot & not cold) & they run just fine on track. What's also nice is that a 9mV threshold also works well for Sanyo 3000HV's(which I still have some packs of), so I don't have to change it over to do any of my NiMh packs....
Fastharry, i'm talking bout the old 1 (1.2v)
#47
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
Re: .
Originally posted by glide 1
That's exactly what i wanted to hear!!...thanks for the info Grizzbob
Fastharry, i'm talking bout the old 1 (1.2v)
That's exactly what i wanted to hear!!...thanks for the info Grizzbob
Fastharry, i'm talking bout the old 1 (1.2v)
so Calvin thiks we're talking about the PRO,and you're talking about athe ORIGINAL millenium..
no wonder this thread reads like an Abbot & Costello routine
#48
LOL...
Sorry for all the confusion guys
#49
for the settings for the gp 3300's i found that these work. try em both
6 mb
5.5 amps
5mv
6.5 amps
any suggestions for sanyo 3300's that work
6 mb
5.5 amps
5mv
6.5 amps
any suggestions for sanyo 3300's that work
#50
I found a power supply from Integy on their site for 65 bucks. It has a 10 amp out put I think. That's pretty good for me. Will be able to charge my 6 amps I need to easily.