BMI's DB12R
10-05-2007, 08:01 AM
#2041
Thanks Jason,
You'll have to forgive my lack of 12 scale knowledge still trying to get a handle on them so here is what I've got.
I miss typed my ride height issue 0.1-0.2mm difference sorry. I thought I had it sorted out but I changed to a non-steped ride height gauge and it shows that it's still there.
I am going to call today and get a set of ride height adjusters and see if that will eliminate the problem.
My setup is:
Base setup in kit instructions,
no changes
Carpet Track/RC Madness CT, tight smooth, medium grip
Liliac Front
Yellow Rears
Paragon 1/2 on front, Full rear, no glue
CO27 32/88 1.80 rear tires front(can't remember)
GTX max punch
IB's all the way back
Futaba Digital servo 9...
Kimbrough servo saver CRC carbon brace
z-1 no change to throttle or steering curve
12b Body
Car is blanced perfect, track width corrected for new jaco's
On power push, slight tweek left front, rideheight off
You'll have to forgive my lack of 12 scale knowledge still trying to get a handle on them so here is what I've got.
I miss typed my ride height issue 0.1-0.2mm difference sorry. I thought I had it sorted out but I changed to a non-steped ride height gauge and it shows that it's still there.
I am going to call today and get a set of ride height adjusters and see if that will eliminate the problem.
My setup is:
Base setup in kit instructions,
no changes
Carpet Track/RC Madness CT, tight smooth, medium grip
Liliac Front
Yellow Rears
Paragon 1/2 on front, Full rear, no glue
CO27 32/88 1.80 rear tires front(can't remember)
GTX max punch
IB's all the way back
Futaba Digital servo 9...
Kimbrough servo saver CRC carbon brace
z-1 no change to throttle or steering curve
12b Body
Car is blanced perfect, track width corrected for new jaco's
On power push, slight tweek left front, rideheight off
10-05-2007, 08:21 AM
#2042
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
But to each his own....
10-05-2007, 09:43 AM
#2043
Tech Initiate
Jason, just what does your new front ride height shims measure in thickness from thickess to the thiness one?
Thanks
Allen
Thanks
Allen
10-05-2007, 10:00 AM
#2046
By the way. My job is more special than botho yours
E
Sorry Jason for the wasted space in here.
For what its worth, My computer is finally working and i dont want to break it anymore
10-05-2007, 10:07 AM
#2048
10-05-2007, 10:18 AM
#2049
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
10-05-2007, 04:36 PM
#2052
Jason-YGPM!
10-05-2007, 05:19 PM
#2054
I would like to thank Dave Irrgang (AKA Diffdude) over at Irrgang Racing for his awesome customer service, I contacted Dave over the weekend about a faulty delrin shock cap & I received a new replacement 4 days later, By far some of the best customer service out there!!!!!