Schumacher R12 Fusion
#271
Let me know when your ready marcos, I will get you the setup
#273
Yeah, pretty much!!! I do most of my tuning with tires
#274
Tech Adept
Latin Cup
Well... Hi Fusion R12 Fans and Drivers. This is going to be fast.
I just had a difficult weekend since friday, but still tomorrow is the big race. Maxy was the only one who come by to our island. And btw he made TQ Theres has been some dificulties on the practice and qualifying section. But all is done.
I just could managed to make 1st on the B MAIN. Somehow and don't know why it happens but just it did. But my car and my engine didn't help me to much everything went backwards. And I'm very disapointed cuz a know I could do better. And after that, the put the sugarwater thing on the track and i'm very upset with it. But oh well..
here are some pics from friday and saturday at the track from our Puerto Rico forum, some of you would not and will understand the spelling cuz it's on spanish, just see the pics.
seyaa then, bye
http://www.hobbiespr.com/forum/forum...?TID=1259&PN=1
I just had a difficult weekend since friday, but still tomorrow is the big race. Maxy was the only one who come by to our island. And btw he made TQ Theres has been some dificulties on the practice and qualifying section. But all is done.
I just could managed to make 1st on the B MAIN. Somehow and don't know why it happens but just it did. But my car and my engine didn't help me to much everything went backwards. And I'm very disapointed cuz a know I could do better. And after that, the put the sugarwater thing on the track and i'm very upset with it. But oh well..
here are some pics from friday and saturday at the track from our Puerto Rico forum, some of you would not and will understand the spelling cuz it's on spanish, just see the pics.
seyaa then, bye
http://www.hobbiespr.com/forum/forum...?TID=1259&PN=1
Last edited by Z24; 08-02-2005 at 12:02 PM.
#277
Tech Adept
MO Great!!!! keep up the good work
#278
boyz in da hood
boyz in da hood i gotta question for you... anyone who owns this car ever went head to head with a serpent 710 or a prospec? what da _u_k happened??? how's the shoe type clutch? i'm thinkin of getting this car but have lotsa questions coz back here where i live we dont get parts from SCHUMACHER... too bad! how is the m12 and r12 in your personal opinion? i had a schumacher 2wd EP buggy when i was a kid and back then and it really ran well except for the parts! i have a G4 and i'm getting tired waiting for the STEERING PROBLEM solution coz Team Magic hasn't come up with a solution for it yet! well bummer!!! oh well!!! hope anyone can help me out chief... anyone! PM me so we can have a private conversation hahahaha!
#279
Tech Master
iTrader: (7)
I posted my setup for the R12 on www.gearchart.com if anyone is interested.
rbboy, both the Mi2 and the R12 handle as good or better than any other car. The 2 shoe clutch on the R12 is a little harder to tune than a centax but with a little extra tinkering, you should have it running like a champ. I ran the R12 for the first time this weekend and found it to be very smooth and consistant.
rbboy, both the Mi2 and the R12 handle as good or better than any other car. The 2 shoe clutch on the R12 is a little harder to tune than a centax but with a little extra tinkering, you should have it running like a champ. I ran the R12 for the first time this weekend and found it to be very smooth and consistant.
#280
Super Moderator
iTrader: (239)
Re: boyz in da hood
Originally posted by rbboy
boyz in da hood i gotta question for you... anyone who owns this car ever went head to head with a serpent 710 or a prospec? what da _u_k happened??? how's the shoe type clutch? i'm thinkin of getting this car but have lotsa questions coz back here where i live we dont get parts from SCHUMACHER... too bad! how is the m12 and r12 in your personal opinion? i had a schumacher 2wd EP buggy when i was a kid and back then and it really ran well except for the parts! i have a G4 and i'm getting tired waiting for the STEERING PROBLEM solution coz Team Magic hasn't come up with a solution for it yet! well bummer!!! oh well!!! hope anyone can help me out chief... anyone! PM me so we can have a private conversation hahahaha!
boyz in da hood i gotta question for you... anyone who owns this car ever went head to head with a serpent 710 or a prospec? what da _u_k happened??? how's the shoe type clutch? i'm thinkin of getting this car but have lotsa questions coz back here where i live we dont get parts from SCHUMACHER... too bad! how is the m12 and r12 in your personal opinion? i had a schumacher 2wd EP buggy when i was a kid and back then and it really ran well except for the parts! i have a G4 and i'm getting tired waiting for the STEERING PROBLEM solution coz Team Magic hasn't come up with a solution for it yet! well bummer!!! oh well!!! hope anyone can help me out chief... anyone! PM me so we can have a private conversation hahahaha!
#281
Super Moderator
iTrader: (239)
here is a set up that Paul Wynn gave me for the r-12
Chassis:
Brand and type: Shumacher R12
Track conditions:
Track (if not listed): good
Air temperature: n/a
Track temperature: n/a
Traction: exellent
Suspension geometry Front:
Downstops: 0
Camber Left: 2 degress
Camber Right: 2 degress
Track-width: 198
Toe-in: 0 degree
Caster setting (mm in front): 6.5
Suspension geometry Rear:
Downstops: 0
Camber Left: 2 degress
Camber Right: 2 degress
Toe-in: 2 degress
Track-width: 198
Shockabsorbers Front:
Springs: 25 lb. x-ray blue
Oil: 50
Holes: 2
Shock-tower position: 3/1 mission towers
Shockabsorbers Rear:
Springs: 25 lb. x-ray blue
Oil: 50
Holes: 2
Shock-tower position: 3/1 mission towers
Anti-roll bar front:
Thickness: stock
Position:
Anti-roll bar rear:
Thickness: stock
Position: stock
Tires Front:
Make: TAKE OFFS
Compound: FOAM
Belted:
Hardness Left: 40
Hardness Right: 40
Diameter: 60mm
Tires rear:
Make: TAKE OFFS
Compound: FOAM
Belted:
Hardness Left: 40
Hardness Right: 40
Diameter: 61mm
Transmission:
Pinion 1st: stock 2 speed
Gear 1st:
Front axle:
Type: one-way
Diff. grease:
Rear axle:
Type: ball diff
Diff. grease: stock
Aerodynamics:
Body: Stratus 2.1
Wing:
Gurney strip:
motor brand: os tr .12
pipe : stock
Chassis:
Brand and type: Shumacher R12
Track conditions:
Track (if not listed): good
Air temperature: n/a
Track temperature: n/a
Traction: exellent
Suspension geometry Front:
Downstops: 0
Camber Left: 2 degress
Camber Right: 2 degress
Track-width: 198
Toe-in: 0 degree
Caster setting (mm in front): 6.5
Suspension geometry Rear:
Downstops: 0
Camber Left: 2 degress
Camber Right: 2 degress
Toe-in: 2 degress
Track-width: 198
Shockabsorbers Front:
Springs: 25 lb. x-ray blue
Oil: 50
Holes: 2
Shock-tower position: 3/1 mission towers
Shockabsorbers Rear:
Springs: 25 lb. x-ray blue
Oil: 50
Holes: 2
Shock-tower position: 3/1 mission towers
Anti-roll bar front:
Thickness: stock
Position:
Anti-roll bar rear:
Thickness: stock
Position: stock
Tires Front:
Make: TAKE OFFS
Compound: FOAM
Belted:
Hardness Left: 40
Hardness Right: 40
Diameter: 60mm
Tires rear:
Make: TAKE OFFS
Compound: FOAM
Belted:
Hardness Left: 40
Hardness Right: 40
Diameter: 61mm
Transmission:
Pinion 1st: stock 2 speed
Gear 1st:
Front axle:
Type: one-way
Diff. grease:
Rear axle:
Type: ball diff
Diff. grease: stock
Aerodynamics:
Body: Stratus 2.1
Wing:
Gurney strip:
motor brand: os tr .12
pipe : stock
#282
Tech Adept
Well, here are the results of yesterday Latin Cup Race.
Maxy won the race, but with a extreme battle, it wasn't easy for him to take the victory. But it was a great race to watch with a lot of action.
And for me. I lapped most of the drivers by 2 laps ahead, and suddenly got hit by anoher car, and that was the end of it. I was very upset, cuz I was ready to bump for the A MAIN, to join top notch drivers including MAXY eheheheh. but oh well, things like this happens. Just think positive way for the next race.
Paul, there's going to be another event on december 10 & 11.
http://monsterhobby.com/monster/viewtopic.php?p=62#62
and some pics too.
http://www.hobbiespr.com/forum/forum...259&PN=1&TPN=2
Marcos, nice setup sheets, never saw this setups before. But they look good.
R12 Rookie Driver
Angel Rosario
Maxy won the race, but with a extreme battle, it wasn't easy for him to take the victory. But it was a great race to watch with a lot of action.
And for me. I lapped most of the drivers by 2 laps ahead, and suddenly got hit by anoher car, and that was the end of it. I was very upset, cuz I was ready to bump for the A MAIN, to join top notch drivers including MAXY eheheheh. but oh well, things like this happens. Just think positive way for the next race.
Paul, there's going to be another event on december 10 & 11.
http://monsterhobby.com/monster/viewtopic.php?p=62#62
and some pics too.
http://www.hobbiespr.com/forum/forum...259&PN=1&TPN=2
Marcos, nice setup sheets, never saw this setups before. But they look good.
R12 Rookie Driver
Angel Rosario
#283
Originally posted by Z24
Well, here are the results of yesterday Latin Cup Race.
Maxy won the race, but with a extreme battle, it wasn't easy for him to take the victory. But it was a great race to watch with a lot of action.
Well, here are the results of yesterday Latin Cup Race.
Maxy won the race, but with a extreme battle, it wasn't easy for him to take the victory. But it was a great race to watch with a lot of action.
#284
Tech Adept
Initial D: Maxy was using a Serpent 710 and i think he was using a Nova Mega but don't know wich model exactly. The rest of the pack were all local drivers. Maxy was the only one able to come by.
#285
Super Moderator
iTrader: (239)
Originally posted by InitialD
Who were the A main drivers? What car and engine was Maxy using?
Who were the A main drivers? What car and engine was Maxy using?
www.maxysfuel.com