Mugen MTX-2
#2806
hey all.. i have just finished re-assembling my long lost mtx2 prospec..
wondering what weights i should use in diffs for small, dusty parking lot?
I have currently avaliable to me:
Kyosho 3000wt
Mugen #10000
Mugen #600 Shock oil
and a bit of Kyosho #15000
ideas? This oneway seems like a bad idea for the small area. thnx.
(btw: basic setup would be cool too, if anyone is willing..im on 40-42 shore foams)
wondering what weights i should use in diffs for small, dusty parking lot?
I have currently avaliable to me:
Kyosho 3000wt
Mugen #10000
Mugen #600 Shock oil
and a bit of Kyosho #15000
ideas? This oneway seems like a bad idea for the small area. thnx.
(btw: basic setup would be cool too, if anyone is willing..im on 40-42 shore foams)
#2807
Tech Master
Originally posted by tranced
hey all.. i have just finished re-assembling my long lost mtx2 prospec..
wondering what weights i should use in diffs for small, dusty parking lot?
I have currently avaliable to me:
Kyosho 3000wt
Mugen #10000
Mugen #600 Shock oil
and a bit of Kyosho #15000
ideas? This oneway seems like a bad idea for the small area. thnx.
(btw: basic setup would be cool too, if anyone is willing..im on 40-42 shore foams)
hey all.. i have just finished re-assembling my long lost mtx2 prospec..
wondering what weights i should use in diffs for small, dusty parking lot?
I have currently avaliable to me:
Kyosho 3000wt
Mugen #10000
Mugen #600 Shock oil
and a bit of Kyosho #15000
ideas? This oneway seems like a bad idea for the small area. thnx.
(btw: basic setup would be cool too, if anyone is willing..im on 40-42 shore foams)
#2808
Tech Adept
does anybody want to buy an mtx2?? pm me
#2810
MY web site
Hello Everyone,
I am still working on my new web site 3Hobby.Com and have 2 friends from the RC world looking and testing it this week.
However I noticed that others have looked at it and even joined as a registered user and am very happy to see that. I feel therefore it is time to invite all of you to take a look and join also.
The website is designed to be used differently to RCTech or myTSN and therefore complements both these web sites. I hope you enjoy sharing the joys and passion of our hobby, especially RC Racing. I do tremendously and this is my contribution back to the community!
Enjoy.
I am still working on my new web site 3Hobby.Com and have 2 friends from the RC world looking and testing it this week.
However I noticed that others have looked at it and even joined as a registered user and am very happy to see that. I feel therefore it is time to invite all of you to take a look and join also.
The website is designed to be used differently to RCTech or myTSN and therefore complements both these web sites. I hope you enjoy sharing the joys and passion of our hobby, especially RC Racing. I do tremendously and this is my contribution back to the community!
Enjoy.
#2811
AH10... i still love this car in the picture!!! AWESOME!
looks very pro
#2812
Will MTX-3 Pinions fit correctly on ProSpec Centax Clutchbell?
Any substitutes for Mugen brand pinion? (FOR MTX2)
Also: whats a good 2 speed setting for RS12/MT12.. ?
Any substitutes for Mugen brand pinion? (FOR MTX2)
Also: whats a good 2 speed setting for RS12/MT12.. ?
Last edited by tranced; 05-07-2004 at 12:51 PM.
#2813
It fits perfectly!
setting for 2-speed? Try two-turn-out, then work from there.
setting for 2-speed? Try two-turn-out, then work from there.
Originally posted by tranced
Will MTX-3 Pinions fit correctly on ProSpec Centax Clutchbell?
Any substitutes for Mugen brand pinion? (FOR MTX2)
Also: whats a good 2 speed setting for RS12/MT12.. ?
Will MTX-3 Pinions fit correctly on ProSpec Centax Clutchbell?
Any substitutes for Mugen brand pinion? (FOR MTX2)
Also: whats a good 2 speed setting for RS12/MT12.. ?
#2814
Tech Master
Originally posted by eddiethefish
It fits perfectly!
setting for 2-speed? Try two-turn-out, then work from there.
It fits perfectly!
setting for 2-speed? Try two-turn-out, then work from there.
Stock setting from manuel is 3 1/2 turns out from closed
#2815
Tech Master
Originally posted by tranced
AH10... i still love this car in the picture!!! AWESOME!
looks very pro
AH10... i still love this car in the picture!!! AWESOME!
looks very pro
#2816
Tech Master
Originally posted by tranced
Will MTX-3 Pinions fit correctly on ProSpec Centax Clutchbell?
Any substitutes for Mugen brand pinion? (FOR MTX2)
Also: whats a good 2 speed setting for RS12/MT12.. ?
Will MTX-3 Pinions fit correctly on ProSpec Centax Clutchbell?
Any substitutes for Mugen brand pinion? (FOR MTX2)
Also: whats a good 2 speed setting for RS12/MT12.. ?
#2817
At last, thanks for admitting my engine is "powerful".
Originally posted by Ah10
2 turns out setting are for powerful engines
2 turns out setting are for powerful engines
#2818
I was refering to the standard module gears (1.0?)
#2819
It'll fit! As a matter fact, the gears I used on my MTX-3 are directly transferred from MTX-2. It's the Harden Steel ones, and man... they still look like the first day I openned it up.
Wish woman were the same...
stay young, attractive, beauty, just as the first day you laid your eyes on...
oh... well...
depressed fish...
Wish woman were the same...
stay young, attractive, beauty, just as the first day you laid your eyes on...
oh... well...
depressed fish...
Originally posted by tranced
I was refering to the standard module gears (1.0?)
I was refering to the standard module gears (1.0?)
#2820
Originally posted by eddiethefish
It'll fit! As a matter fact, the gears I used on my MTX-3 are directly transferred from MTX-2. It's the Harden Steel ones, and man... they still look like the first day I openned it up.
Wish woman were the same...
stay young, attractive, beauty, just as the first day you laid your eyes on...
oh... well...
depressed fish...
It'll fit! As a matter fact, the gears I used on my MTX-3 are directly transferred from MTX-2. It's the Harden Steel ones, and man... they still look like the first day I openned it up.
Wish woman were the same...
stay young, attractive, beauty, just as the first day you laid your eyes on...
oh... well...
depressed fish...
where can i get harden steel version?