Murnan Modified Motors
#2088
#2091
your compression ratio and timing will vary erratically, thus tuning and power issues, plus you can burn plugs and damage engine....
AFM
#2095
Tech Addict
iTrader: (8)
I used the medium header with the RB2604 pipe, the 2602 is the same pipe. The medium header was perfect for Ft. Myers track.
I think I will use the short header in Kissimmee this weekend. The short header will make the most peak power, but it will do it pretty high in the rpm range. The long header makes less peak power, but makes it's peak earlier in the rpm range.
I think I will use the short header in Kissimmee this weekend. The short header will make the most peak power, but it will do it pretty high in the rpm range. The long header makes less peak power, but makes it's peak earlier in the rpm range.
1) What fuel do you recommend?
2) What break-in method?
3) Do you have the Novarossi 2630 in stock?
4) When will you get the medium header back in stock?
thanks for all your time ...
#2096
#2098
#2099
Tech Champion
iTrader: (91)
Congrats
Uriah Congrats to you & the team loss track but I am sure there was 4 of your .12's in the show & also for the excellent pitting this weekend @ the Florida state race
1 of the most exciting races in sedan I've seen in a while. all your motor's in the main were ballastic
1 of the most exciting races in sedan I've seen in a while. all your motor's in the main were ballastic
Last edited by GMartinez; 03-09-2009 at 02:42 PM.
#2100
Tech Elite
Congrat to Chris for the Win in the "A Main" this past weekend. He ran a great race and kept his cool.
Good job,
DJ Apolaro
Good job,
DJ Apolaro