Roadrash730

iTrader: (9)

heres the pics of the car he bought he emailed them to me earlier

Roadrash730

iTrader: (9)

if its not a 4r its a damn good copy of one

BLKNOTCH

iTrader: (10)

Here are the pics of Skoot's MTX4R

lil-bump

iTrader: (89)

For $50.00 you got a steal. Good job. That is a mtx4r


Pass you soon...

JLock

iTrader: (4)

From the pics, this looks to be a regular MTX4, not a 4R. If I remember correctly, the 4R comes with dark blue shock springs (not the light blue), a better front one-way (with a smaller pulley), CVDs and not dogbones, aluminum hex hubs, aluminum engine mounts, slightly different steering blocks, rubber instead of urethane belts and a couple of other goodies. I have both the 4 and 4R and you can easily upgrade the 4 with about $180 (give or take). However, the rolling chassis was a good deal no matter which version it is if it is in A-1 shape.

VA_Racer

iTrader: (21)

That car is and R. It has the solid one way in front not just the regular one way and the belt tensioner is on the front side of the engine mounts. The regular 4 had the belt tensioner behind the engine and you had to take it off to take the engine out.

xlamontx

iTrader: (15)

My R came with a vented brake disk.


His looks vented too. Or maybe not. lol

lil-bump

iTrader: (89)

The 4 came with light blue springs. The mtx3 came with dark blue springs

JRGTR

it's a R
it have front solid/one way diff,new lower arms,2 o front uprights,rear camber link bridge(short), ventilated brake disc,aluminum engine mounts. hell yeahis a R! sper deal on ebay only need a good high rev engine, I sugest a novarossi,RB or Max Power! and fight low!!!!

Roadrash730

iTrader: (9)

yep thats what i saw and my 4r came with light blue spring i belive the 3prosec came with the dark blue

kcrunchone

iTrader: (1)

The seller really gave up a steal for 50 bucks. Good luck to you and enjoy that baby..........

Dave D

Just dusted off my MTX4. It's been five years since this baby has seen action. Just wanted to know what upgrades do I need to make my 4 into the R and what are the benefits. Any feedback is appreciated.
Dave

VA_Racer

iTrader: (21)

I have heard of people shimming there diffs? Anybody know what this helps with or what it is designed to do? Where do you put the shimms? Does it just take play out of the outdrive and keep it from leaking out from underneath the outdrives?

stefan

I put 5 x 8 x 2.5mm bearings into my diff housings.
It makes the diffs super smooth and they are not leaking anymore

asw7576

Where do you put the 5x8x2.5 bearing ?