CEFX Racing Thread.
#422
.018 front springs w/ Kyosho 15k grease
5 degree blocks w/ castor shims split 1/1
2 degrees of camber
1 degree toe out
Jaco Prism Double Pink fronts @ 1.66 w/ 30% Paragon
3.5mm ride height
.062 Medium T-bar w/ .040 under the front
30wt center shock oil with Green Spring
Kyosho 15k in the tubes
Jaco Prism Yellow rears @ 1.72 w/full Paragon
3.5-4mm ride height
Protoform Speed 12 body
Here's a set-up from a race last year - It was lower bite compared to most other US races so it should be a good starting point for you.
5 degree blocks w/ castor shims split 1/1
2 degrees of camber
1 degree toe out
Jaco Prism Double Pink fronts @ 1.66 w/ 30% Paragon
3.5mm ride height
.062 Medium T-bar w/ .040 under the front
30wt center shock oil with Green Spring
Kyosho 15k in the tubes
Jaco Prism Yellow rears @ 1.72 w/full Paragon
3.5-4mm ride height
Protoform Speed 12 body
Here's a set-up from a race last year - It was lower bite compared to most other US races so it should be a good starting point for you.
Josh, are there any parts suppliers in Europe or is all my hope (and shipping costs) set on the US? But hey, if you wanna drive something different...
#424
Tech Regular
Oval this weekend.
#427
I've ran rubber tire there a few times, so we've had a few race days where it did happen. I can only come out about once every two weeks, the last 2 times I brought my car but no one else to run rubber with. No worries, I alway's pack a 1/12th scale. I was just thinking, would the foam guys running 13.5's let me race with them if I've got a 10.5 and rubber tires?
#428
It's been done before, so ya, I'd say go for it.
#429
Tech Regular
Tom,
I am sure that anybody that shows up with a rubber tire will have a class or group to race with.
Heck they even let people from Tennessee race.
Ted
I am sure that anybody that shows up with a rubber tire will have a class or group to race with.
Heck they even let people from Tennessee race.
Ted
#430
#431
I hope I can give it a try tommorrow. I'll either be too busy tuning my new BL setup I picked up yesterday for my 1/12th scale, or at home weathering this cold I have.
I'd like to ask if anyone out there from CEFX want to do something for electric outdoor racing this summer? Its still possible to get something together for the springtime, I just need help getting stuff together and organized before the season begins, so if you'd like to see this happen please pay a visit to the forum I setup on the DRCCC website.
I'd like to ask if anyone out there from CEFX want to do something for electric outdoor racing this summer? Its still possible to get something together for the springtime, I just need help getting stuff together and organized before the season begins, so if you'd like to see this happen please pay a visit to the forum I setup on the DRCCC website.
#432
What Motor pods work with the Phoenix conversion kit.
#434
Good luck in Flo Rida Josh. I've got a lot of money riding on you
#435
^^ i bet he wont be thanking you for that pressure