Axial .12RR Spec 1
#1
Tech Adept
Thread Starter
Axial .12RR Spec 1
Hi Edward
Its a long Time ago......... we write here in RC Tech.
Please tell us something about the AX0060 .12RR Spec 1 .
how is the Engine drive with 16% Nitro(we use in germany)
No one can tell something over this engine?????????????????
Thanks
Marc
Its a long Time ago......... we write here in RC Tech.
Please tell us something about the AX0060 .12RR Spec 1 .
how is the Engine drive with 16% Nitro(we use in germany)
No one can tell something over this engine?????????????????
Thanks
Marc
Last edited by g4-racing.de; 01-26-2007 at 06:49 AM.
#2
Originally Posted by g4-racing.de
Hi Edward
Its a long Time ago......... we write here in RC Tech.
Please tell us something about the AX0060 .12RR Spec 1 .
how is the Engine drive with 16% Nitro(we use in germany)
No one can tell something over this engine?????????????????
Thanks
Marc
Its a long Time ago......... we write here in RC Tech.
Please tell us something about the AX0060 .12RR Spec 1 .
how is the Engine drive with 16% Nitro(we use in germany)
No one can tell something over this engine?????????????????
Thanks
Marc
Grundsaetzlich ist der Motor vergleichbar mit dem Palmaris PR12 und den kennt ja der Dieter Weck ziemlich gut.
Frag doch einfach mal bei Robitronic an, die wollen den Motor schliesslich in Europa vertreiben.
#3
Tech Adept
Thread Starter
Hi Stefan
Den Pr von Dieter kenn ich ja und hab ihn ja auch schon des öfteren gesehen.Fahre selber4 das BRB Set .Dachte nur jetzt wo der Axial Aktuell raus ist gibt es schon Erfahrungen.Ich bekomme meinen am Montag nur leider ist das Wetter noch nicht so dolle zum testen
Gruß marc
Den Pr von Dieter kenn ich ja und hab ihn ja auch schon des öfteren gesehen.Fahre selber4 das BRB Set .Dachte nur jetzt wo der Axial Aktuell raus ist gibt es schon Erfahrungen.Ich bekomme meinen am Montag nur leider ist das Wetter noch nicht so dolle zum testen
Gruß marc
#4
recieved a 12RR yesterday and it looks great.
Any one running them so we can get feedback.
I know they are based on or are the same as Palmaris PR12 but am sure there is differences that make them better perhaps.
My PR12 is running awesome and am looking forward to running the 12RR.
Any one running them so we can get feedback.
I know they are based on or are the same as Palmaris PR12 but am sure there is differences that make them better perhaps.
My PR12 is running awesome and am looking forward to running the 12RR.
#5
Marc Kreisig fährt den doch, Marc.
#6
Marc,
wo hast Du den denn gekauft, und vor allem, was hat er denn gekostet?
Gerne auch per PN.
Wäre auch schön wenn Du ein paar Bilder von dem Motor machen könntest und hier reinstellst ( mit Innereien)
Danke,
Stefan
wo hast Du den denn gekauft, und vor allem, was hat er denn gekostet?
Gerne auch per PN.
Wäre auch schön wenn Du ein paar Bilder von dem Motor machen könntest und hier reinstellst ( mit Innereien)
Danke,
Stefan
#7
Hallo Stefan,
der Vertrieb läuft über Robitronic. Dort ist er für 299 Euro gelistet. Somit alle Robitronicbestellbaren Händler können den besorgen.
Marc Kreisig hat damit auch das Kyosho Rennen in Österreich gewonnen.
der Vertrieb läuft über Robitronic. Dort ist er für 299 Euro gelistet. Somit alle Robitronicbestellbaren Händler können den besorgen.
Marc Kreisig hat damit auch das Kyosho Rennen in Österreich gewonnen.
#8
Hi guys.
Well, most of this tread in German and I don't understand word from it, but I want to tell you that Marc Kreisig last weekend won some big international race in Austria where were present Huddy family and other world class drivers. I don't have full list of drivers there, but I guess if Marc won the race-then it was fast motor. Also Marc won 2nd round of RCM cup month ago in Germany.
Todd Bath on Winternats was pushing JILLES GROSKAMP on the D-main and he lost to Jilies just 1 lap finishing 2nd, Peter Breton winishes 6 in C-main. I think it is pretty good results for Todd and Peter and I am pretty happy with it. Unfortuanately I couldn't come to Winternats due to the very busy schedule at work (I have 4 project in proccess right now and one of them is really huge-over 1.5 Gig when it is open).
Well, most of this tread in German and I don't understand word from it, but I want to tell you that Marc Kreisig last weekend won some big international race in Austria where were present Huddy family and other world class drivers. I don't have full list of drivers there, but I guess if Marc won the race-then it was fast motor. Also Marc won 2nd round of RCM cup month ago in Germany.
Todd Bath on Winternats was pushing JILLES GROSKAMP on the D-main and he lost to Jilies just 1 lap finishing 2nd, Peter Breton winishes 6 in C-main. I think it is pretty good results for Todd and Peter and I am pretty happy with it. Unfortuanately I couldn't come to Winternats due to the very busy schedule at work (I have 4 project in proccess right now and one of them is really huge-over 1.5 Gig when it is open).
#9
Originally Posted by g4-racing.de
Hi Edward
Its a long Time ago......... we write here in RC Tech.
Please tell us something about the AX0060 .12RR Spec 1 .
how is the Engine drive with 16% Nitro(we use in germany)
No one can tell something over this engine?????????????????
Thanks
Marc
Its a long Time ago......... we write here in RC Tech.
Please tell us something about the AX0060 .12RR Spec 1 .
how is the Engine drive with 16% Nitro(we use in germany)
No one can tell something over this engine?????????????????
Thanks
Marc
Axial 12 RR Spec1 is refined version of PR12. It uses our exlusive Bi-metal sleeve technology (please don't compare to OS bi-metal technology-it is different thing). We are running this engine since 2006 Winternats when Chris Tosolini got 2nd on this engine, then Todd Bath won Texas Biggy with it, Ron Atomic got 7th Place on Naionals last year, Jose Casas won PreNats. It is too much to list all races where engie was used and got very good standing
I don't have any pictures of internals in my home right now ( ), but ones I get new engine-I will take it on parts and will post it here.
Shiraz, may be you can take a pics from your engine and post them here-yours is still brand new
#10
Tech Regular
EdwardN.
How can we get a hold on the engine? can you ship them to Peru??
How can we get a hold on the engine? can you ship them to Peru??
#11
Originally Posted by ALG
EdwardN.
How can we get a hold on the engine? can you ship them to Peru??
How can we get a hold on the engine? can you ship them to Peru??
Yes it can be ship to Peru with no problem
Shoot email to [email protected] and I am sure he will take care of it.
#12
Ed for you, no problem
Engine is in shop so will post some pics tomorrow.
Pictures dont do the engine justice.In person its very striking
The green head also will definately attract attention at the track.
next to my Black Magic AxeMotorRossi its the best looking engine ive seen.
If its improved version of PR12 then I need to practice more to make the most of it.
have seen some comments is a few places about it but no real feed back.
Well its a new year and looking forward to running the 12RR.
Hope we can keep this thread going for a awesome engine .
Engine is in shop so will post some pics tomorrow.
Pictures dont do the engine justice.In person its very striking
The green head also will definately attract attention at the track.
next to my Black Magic AxeMotorRossi its the best looking engine ive seen.
If its improved version of PR12 then I need to practice more to make the most of it.
have seen some comments is a few places about it but no real feed back.
Well its a new year and looking forward to running the 12RR.
Hope we can keep this thread going for a awesome engine .
#13
Originally Posted by jaykay
Hallo Stefan,
der Vertrieb läuft über Robitronic. Dort ist er für 299 Euro gelistet. Somit alle Robitronicbestellbaren Händler können den besorgen.
Marc Kreisig hat damit auch das Kyosho Rennen in Österreich gewonnen.
der Vertrieb läuft über Robitronic. Dort ist er für 299 Euro gelistet. Somit alle Robitronicbestellbaren Händler können den besorgen.
Marc Kreisig hat damit auch das Kyosho Rennen in Österreich gewonnen.
so weit war das schon klar. Ich habe jedoch noch keinen Shop gefunden der den Motor gelistet hat ausser the border.
Wollte mal wissen was der im Laden kostet.
Edward, good to see you again. How has life been treating you?
#14
Originally Posted by stefan
Hi Mario,
so weit war das schon klar. Ich habe jedoch noch keinen Shop gefunden der den Motor gelistet hat ausser the border.
Wollte mal wissen was der im Laden kostet.
Edward, good to see you again. How has life been treating you?
so weit war das schon klar. Ich habe jedoch noch keinen Shop gefunden der den Motor gelistet hat ausser the border.
Wollte mal wissen was der im Laden kostet.
Edward, good to see you again. How has life been treating you?
I am OK. Been very busy lately with banch of projects.
Are you still racing?
Edward
#15
Hi Ed,
of course I"m still racing. Have you ever seen anybody that got away from this drug?
of course I"m still racing. Have you ever seen anybody that got away from this drug?