Alex Racing Barracuda R2 & R3
#4306
Regional Moderator
Originally posted by Randman
Lots of hostility towards the Evo in here guys
I do still have a R2 remember?
Lots of hostility towards the Evo in here guys
I do still have a R2 remember?
ah now we are just having fun and the EVo stuff belongs somewhere else
#4307
Tech Master
Hello all was thinking of changing spurs and pinions from 48p to 64. Does anyone know the correct conversion on how to do so?
Or better yet what are you useing to keep gear ratio's between 6.4 to 7.5
Or better yet what are you useing to keep gear ratio's between 6.4 to 7.5
#4308
HI,,GUYS
IS IT TRUE THAT THE DELRIN DIFFS.IN THE CUDA WILL BREAK IF YOU OVER TIGHTEN THEM TO GET MORE STEERING???
IS IT TRUE THAT THE DELRIN DIFFS.IN THE CUDA WILL BREAK IF YOU OVER TIGHTEN THEM TO GET MORE STEERING???
#4312
Tech Elite
iTrader: (16)
Originally posted by GAMBO94
HI,,GUYS
IS IT TRUE THAT THE DELRIN DIFFS.IN THE CUDA WILL BREAK IF YOU OVER TIGHTEN THEM TO GET MORE STEERING???
HI,,GUYS
IS IT TRUE THAT THE DELRIN DIFFS.IN THE CUDA WILL BREAK IF YOU OVER TIGHTEN THEM TO GET MORE STEERING???
as an fyi the delrin R2 diff is so close to the Yok delrin pieces that yo would see that car have the same problem. so close you could probly use it with the longer front dog-bones - which i haven't tried by the way
#4313
Registered User
Xtreme RC Cars Magazine Barracuda R2 Review
#4314
Originally posted by Randman
No, there's always gonna be that problem I think, but luckily for me, I stay off the boards pretty well
No, there's always gonna be that problem I think, but luckily for me, I stay off the boards pretty well
Dan
#4315
Originally posted by Randman
Lots of hostility towards the Evo in here guys
I do still have a R2 remember?
Lots of hostility towards the Evo in here guys
I do still have a R2 remember?
Dan
#4316
Originally posted by Ko Racer
this new chassis is 3mm thick with 1mm removed where the bulk heads and motor mount and steering post are for LCG . this should be a kick a $$ chassis cant wait to run this baby.
this new chassis is 3mm thick with 1mm removed where the bulk heads and motor mount and steering post are for LCG . this should be a kick a $$ chassis cant wait to run this baby.
#4317
R/C Tech Elite Member
iTrader: (47)
Originally posted by Maj. Teeth
Sorry for being late. Was at Socal the whole day. As for Randy's driving, I can sure vouch for that. This guy is awesome and runs just fine alongside the Pro guys. Something he should definately be proud of..
Dan
Sorry for being late. Was at Socal the whole day. As for Randy's driving, I can sure vouch for that. This guy is awesome and runs just fine alongside the Pro guys. Something he should definately be proud of..
Dan
#4318
Originally posted by Randman
Thanks for the good words Dan I picked up a GT7 today so that I can run stock or 23 turn tomorrow. Dont really know why I'm having the urge to run slower motors though
Thanks for the good words Dan I picked up a GT7 today so that I can run stock or 23 turn tomorrow. Dont really know why I'm having the urge to run slower motors though
I'm thinking tomorrow night, strap on some nice Fukuyama Cells (Jimmy's personal stash along with a motor he built for me, gear it down a tooth or use red springs on both sides, ask slim to let me start last just so I can start first in the second heat and TQ BABY!!!!!)......
Dan
#4320
Originally posted by Randman
Or you could just hook me up with Jimmy's personal stash and that motor he built and I'll show the prostock (if they even get a heat of them) guys how to drive on a technical course
Or you could just hook me up with Jimmy's personal stash and that motor he built and I'll show the prostock (if they even get a heat of them) guys how to drive on a technical course
Dan