Alex Racing Barracuda R2 & R3
#2761
Tech Champion
iTrader: (9)
Setting Droop....
Using RBF setup from the Reedy race...
the least amount of droop I can get on the car is around 6mm in front... the rear is no problem.
with the shocks built to around 60mm. and set on the outer holes on the tower and arms. How do you get it down to 3mm?
First run impressions....
Carries alot of corner speed alot more than my SD.
Seems to handle alot better.
Just waiting for Springs & sway bars to arrive...the car should get better. I'll have to definately shim the gears...it is very loud!
Will have it's first race this Sunday...
the least amount of droop I can get on the car is around 6mm in front... the rear is no problem.
with the shocks built to around 60mm. and set on the outer holes on the tower and arms. How do you get it down to 3mm?
First run impressions....
Carries alot of corner speed alot more than my SD.
Seems to handle alot better.
Just waiting for Springs & sway bars to arrive...the car should get better. I'll have to definately shim the gears...it is very loud!
Will have it's first race this Sunday...
#2762
Tech Champion
iTrader: (34)
Re: Setting Droop....
Originally posted by rc-zombies
Using RBF setup from the Reedy race...
the least amount of droop I can get on the car is around 6mm in front... the rear is no problem.
with the shocks built to around 60mm. and set on the outer holes on the tower and arms. How do you get it down to 3mm?
First run impressions....
Carries alot of corner speed alot more than my SD.
Seems to handle alot better.
Just waiting for Springs & sway bars to arrive...the car should get better. I'll have to definately shim the gears...it is very loud!
Will have it's first race this Sunday...
Using RBF setup from the Reedy race...
the least amount of droop I can get on the car is around 6mm in front... the rear is no problem.
with the shocks built to around 60mm. and set on the outer holes on the tower and arms. How do you get it down to 3mm?
First run impressions....
Carries alot of corner speed alot more than my SD.
Seems to handle alot better.
Just waiting for Springs & sway bars to arrive...the car should get better. I'll have to definately shim the gears...it is very loud!
Will have it's first race this Sunday...
First measure the ride height, then lift the chassis until the setting wheels are just touching. the difference is the amount of droop. 3mm is a good baseline.
#2766
R/C Tech Elite Member
iTrader: (47)
Originally posted by Randman
damnit, now I'm pissed. I was going to send my batts to Fukuyama, and send out a money order, and the damn street is completely blocked, and there is a 45 minute wait until it will open again so now I'm stuck at home for god knows how long
damnit, now I'm pissed. I was going to send my batts to Fukuyama, and send out a money order, and the damn street is completely blocked, and there is a 45 minute wait until it will open again so now I'm stuck at home for god knows how long
#2771
R/C Tech Elite Member
iTrader: (47)
Hey R2ers, just wanted to say the next time you need racing packs, check out Fukuyama Racing (Maj. Teeth's company) he uses turbomatchers, so all of the #'s are legit, he's rematching 5 of my packs right now so that I can get some more accurate #'s. But mainly Dan is a great guy to deal with, and is very helpful. I am working on his website right now, so online ordering will become very easy before long
#2772
Tech Champion
iTrader: (9)
Originally posted by Randman
Hey R2ers, just wanted to say the next time you need racing packs, check out Fukuyama Racing (Maj. Teeth's company) he uses turbomatchers, so all of the #'s are legit, he's rematching 5 of my packs right now so that I can get some more accurate #'s. But mainly Dan is a great guy to deal with, and is very helpful. I am working on his website right now, so online ordering will become very easy before long
Hey R2ers, just wanted to say the next time you need racing packs, check out Fukuyama Racing (Maj. Teeth's company) he uses turbomatchers, so all of the #'s are legit, he's rematching 5 of my packs right now so that I can get some more accurate #'s. But mainly Dan is a great guy to deal with, and is very helpful. I am working on his website right now, so online ordering will become very easy before long
Hope to get some Fukuyama Racing cells soon..
I agree.... Dan is great guy to deal with... very honest and professional.