Castle Creations Mamba/MM/MMM FACTORY Q&A thread!
#2072
I have a Sidewinder ESC that I updated to firmware v1.22. I have the motor connected to a Novak 13.5 brushless motor. I am using a Team Associated 5000mah 7.2v lipo (35C). I am using an M11 radio with DSS Airtronics receiver.
The motor never runs. It always cogs throughout the entire throttle range. It never gains any speed.
I have reprogrammed in many times, trying differant Start Power and Punch Control.
Nothing seems to stop the cogging. The cogging is so bad that the car will not even move.
Do you have suggestions on how I can eliminate the cogging, or get the motor to power up and run at full RPM?
thanks,
tim
The motor never runs. It always cogs throughout the entire throttle range. It never gains any speed.
I have reprogrammed in many times, trying differant Start Power and Punch Control.
Nothing seems to stop the cogging. The cogging is so bad that the car will not even move.
Do you have suggestions on how I can eliminate the cogging, or get the motor to power up and run at full RPM?
thanks,
tim
#2073
Tech Initiate
To Joe Ford or who ever it concerns I just got a Mamba Monster set up with the 2650kv motor I ran 1 pack thru it for practice and I took it to our race today and was running great for the 3 qualifiers then I went to get ready for the A main and turned it on and the ESC just went up in smoke it was pouring like a orange smoke from it and melted the red wire and the receiver wire off of it THIS THING IS TOAST me and a friend started this track 2 years ago and it has really taken off in our home town we had 78 drivers today at our club race we even get some team drivers there like Jesse Robbers ( team Hot Bodies ) and it just didn't look good that my new system did this and now I will not be able to race since it looks like even if you warranty this that you have a 3-4 week turn around on this service is this a common problem on this system or did I just get a dud so just let me know because I have a bunch of our drivers wanting to go brushless conversion on there 1/8 scale buggies and there all up in the air on what to go with everyone is just kinda watching everyone system to see what to do and one more ? was wondering if you guys had any interest in sending us a banner of some sort for a back straight away wall we have had acouple guys send us some like Traxxas and some of our local businesses here's a link to our track thanks
http://sunrisercraceway.com/
http://sunrisercraceway.com/
Last edited by pitstang; 08-21-2009 at 03:03 PM.
#2074
Pitstang...email me @ [email protected] with vehicle, gearing, batteries (manufacturer, capacity, and C rating please). I generally don't have time for the forums anymore...workload increased like crazy.
#2076
Tech Initiate
Joe Ford I sent you the info on Friday and was wondering if you have got it yet and what is my next step to get this taking care of thanks
#2083
Tech Regular
iTrader: (7)
I just stumbled across this thread and would like to thank Castle for their excellent support. I had a problem with my son's ESC/Motor combo and their suggestions were right on the money. How many companies support their hardware with free firmware and software a year after you buy it ? Thanks again, specifically to Joe.
#2085
The 2.5T motor was meant to run on 4 cell nimh or 1S lipo, considerably lower voltage and the Mamba will handle it fine as long as you have a separate rx pack.
BTW, good to see this thread back alive after nearly a month of nothingness.
Where is the MMP???