ACADEMY New SB V2 4WD Buggy
#243
Tech Apprentice
iTrader: (1)
Whats going on every body? I wanted to post some pics of my car. How do you do it? I've got some posted on www.semosar.com
#246
Tech Elite
iTrader: (79)
Here is a link to my SBV2 in action at Winterfest this last weekend hosted by Planet Rc of Indianapolis.
I believe this was round 4 of quals.
I think I could have got the car set up a little better for the track conditions with a little more time.
http://rcforum.co.kr/rcbbs/view.php?...esc=asc&no=901
later
Dayton
I believe this was round 4 of quals.
I think I could have got the car set up a little better for the track conditions with a little more time.
http://rcforum.co.kr/rcbbs/view.php?...esc=asc&no=901
later
Dayton
#248
Tech Adept
Hi guys, thought i would get the car finished today but iv run in to a problem,
was just about to start building the shocks when i noticed the Diff hub ring's will not stay in place, and the rear Drive Shafts keep falling out, infact the rear Hubs seem very poor compared to the fronts.
even though there’s no instructions as such iv not been having any problems following the diagrams, everything has been going very smooth until now, and everything looks to be in the correct locations, anyone else have this problem or have an idea of the cause please?
how come the fronts are like the tuning part v-009 that’s available for the rears, but the kit rears seem very poor?
Thanks
(also posted @ http://www.rc10b4.com/forum/showthre...d=1#post131180 )
was just about to start building the shocks when i noticed the Diff hub ring's will not stay in place, and the rear Drive Shafts keep falling out, infact the rear Hubs seem very poor compared to the fronts.
even though there’s no instructions as such iv not been having any problems following the diagrams, everything has been going very smooth until now, and everything looks to be in the correct locations, anyone else have this problem or have an idea of the cause please?
how come the fronts are like the tuning part v-009 that’s available for the rears, but the kit rears seem very poor?
Thanks
(also posted @ http://www.rc10b4.com/forum/showthre...d=1#post131180 )
#249
Tech Elite
iTrader: (79)
For the rear outdrive "savers" I put just a VERY small dab of ca on the edge of the ring and outdrive and that worked nicely and they can still be removed when need be.
Once you have the shocks on the car the drive shafts should stay in place, they pop out due to the amount of down travel in the arms when the shocks are not attached.
As for the rear bones, there is an optional rear universal kit that matches the front, the Pro SBV2 will have these included I believe.
later
Dayton
Once you have the shocks on the car the drive shafts should stay in place, they pop out due to the amount of down travel in the arms when the shocks are not attached.
As for the rear bones, there is an optional rear universal kit that matches the front, the Pro SBV2 will have these included I believe.
later
Dayton
Last edited by 1armed1; 12-15-2006 at 02:23 PM. Reason: sp
#250
Tech Adept
cheers, i will build the shocks tomorrow and try again, luckily i have the hopup rears on order though forgot i had ordered them lol
#251
Tech Apprentice
iTrader: (1)
Thanks Dave. My good friend John Manyard at [email protected] painted it on the back side of 3/8" lexan.
#253
Tech Fanatic
iTrader: (4)
Hey Guys,
MRC/ACADEMY is looking for OFFROAD Team Drivers. Currently we have about 20 drivers on our team, that is very small amount to represent this big market. We are looking for above average racers, with a professional track attitude, and vast chassis/setup knowledge. If you are, or know someone that would like to run for us, that is an accomplished racer, and that has the qualities to represent a company like us, please e-mail me your racing resume to [email protected]. I will answer every single e-mail, no matter if we decide to bring you on as a team driver or not. I look forward to hearing from you, thank you for your time.
Sincerely,
DAVE GRABOSKI
MRC/ACADEMY is looking for OFFROAD Team Drivers. Currently we have about 20 drivers on our team, that is very small amount to represent this big market. We are looking for above average racers, with a professional track attitude, and vast chassis/setup knowledge. If you are, or know someone that would like to run for us, that is an accomplished racer, and that has the qualities to represent a company like us, please e-mail me your racing resume to [email protected]. I will answer every single e-mail, no matter if we decide to bring you on as a team driver or not. I look forward to hearing from you, thank you for your time.
Sincerely,
DAVE GRABOSKI
#255
Im the only one with command difficulty?
Not able to have body, lower arm, knuckle, steering brace, front burkhead...
I miss race after race
I like this buggy but WHERE IS THE SPAIR PIECES!!!!!!
Academy WAKE-UP!!!!!!!!!!!!!!!!!!!!!
I'm thinking about other alternative. Like buy from Australia.
That make me sad holiday time
Not able to have body, lower arm, knuckle, steering brace, front burkhead...
I miss race after race
I like this buggy but WHERE IS THE SPAIR PIECES!!!!!!
Academy WAKE-UP!!!!!!!!!!!!!!!!!!!!!
I'm thinking about other alternative. Like buy from Australia.
That make me sad holiday time