D-Drive F1 ? From MLP!
#32
Yes, they're very very nice, I'm going to use them for wallpaper...just kidding . Clay is finishing the awards for the banquet right now (on Friday night...jeez!). After that he will get right on them. Had'ya going did'nt I?
#37
Hi all well we got things working again and the bugs out of it OLI your car should be there in the next day or so. I think the storm slowed it down as well. I will finish the last 4 cars this week and ship them every thing is done just need to run the top decks when I was running them last week we had Problems again but it is worked out now.
I would like to let you all know Fred AKA RC OLD MAN is not with MLP as of Sunday and he is going on to do his own thing. I wish him the best!
RC Driver has emailed me and would like to test our cars so I will be sending them one of each come the first of the year.
The DF1 will be back in the works as they say as soon as we get new carbon fiber ok.
We will be taking the F206F1 and the F207F1 and making one car - we had problems with the drive setup on the F206F1 melting diffs and on the F207F1 we fixed it also the batteries were move to the rear and the motor to the front center and this has worked out better.
If you ordered one of these you will get the new car ok. if there is a problem with that email me ok.
We will no longer offer chassis kits for any car! all cars will be complete rollers only!
I am working on a motor deal if it works out the motors will not cost us a penny! True Sponsor Ship in the works there!
I would like to let you all know Fred AKA RC OLD MAN is not with MLP as of Sunday and he is going on to do his own thing. I wish him the best!
RC Driver has emailed me and would like to test our cars so I will be sending them one of each come the first of the year.
The DF1 will be back in the works as they say as soon as we get new carbon fiber ok.
We will be taking the F206F1 and the F207F1 and making one car - we had problems with the drive setup on the F206F1 melting diffs and on the F207F1 we fixed it also the batteries were move to the rear and the motor to the front center and this has worked out better.
If you ordered one of these you will get the new car ok. if there is a problem with that email me ok.
We will no longer offer chassis kits for any car! all cars will be complete rollers only!
I am working on a motor deal if it works out the motors will not cost us a penny! True Sponsor Ship in the works there!
#38
Tech Champion
iTrader: (17)
Marty, this is Howard (almost here at Al's after work all the time..) if you can bring over this F1 to Al's I would love to see it..........(still want to gather all your F1 DVD sometime...LOL)
Anyhow, I have access to the Serpent 835 upper and chassis and I would need some of your opinion about HOW to get you the best information about CNC the chassis and upper deck with the laydown steering conversion...
And about your other prototype Touring car, you can give that to me or Terrance and we can try it out this coming SUNDAY at Kenosha. If you want, we can video tape some laps for your review and we will give you feedback after testing (even though you already said that you don't want to change no more...LOL).
See you at Al's and again....GOOD JOB about this F1 project.
Anyhow, I have access to the Serpent 835 upper and chassis and I would need some of your opinion about HOW to get you the best information about CNC the chassis and upper deck with the laydown steering conversion...
And about your other prototype Touring car, you can give that to me or Terrance and we can try it out this coming SUNDAY at Kenosha. If you want, we can video tape some laps for your review and we will give you feedback after testing (even though you already said that you don't want to change no more...LOL).
See you at Al's and again....GOOD JOB about this F1 project.
#39
Well we can do this for the 835 ok Howard. it is for the 705.
and as for the DF1 and F201SCFPRO and F207F1 and the touring car I will see if they will let me sell them at the hobby shop and keep them there for people to see ok.
But I need to finish all my orders first! ok
and as for the DF1 and F201SCFPRO and F207F1 and the touring car I will see if they will let me sell them at the hobby shop and keep them there for people to see ok.
But I need to finish all my orders first! ok
Last edited by Marty Peterson; 08-03-2008 at 12:40 PM.
#41
Tech Champion
Originally Posted by B3x
Marty
Can you sell adapters to use F201 front wheels onto a F103GT?
Thanks
Can you sell adapters to use F201 front wheels onto a F103GT?
Thanks
#42
They do bolt on but they hit the control arms and you do not have full steering lock. I have made some adapters that push the wheels out and it works but still looking to get the same track width as the F201
Troy with SLCF1 made a set of wheels that worked out here is the link.
http://www.rctech.net/forum/showthre...3&page=2&pp=30
I have also made a Lower Chassis for it to make it the same wheel base as the F201.
I did not like it as much as the new Chassis I am doing more inline with a pan car than a F103. we will see how it comes out.
Troy with SLCF1 made a set of wheels that worked out here is the link.
http://www.rctech.net/forum/showthre...3&page=2&pp=30
I have also made a Lower Chassis for it to make it the same wheel base as the F201.
I did not like it as much as the new Chassis I am doing more inline with a pan car than a F103. we will see how it comes out.