Kyosho V-ONE RRR Ultimate Edition (UE)
#91
Originally Posted by carkillaii
Ill just retap my skyline tower to fit the mounts
That's what I did. Works fine.
#94
Originally Posted by rmdhawaii
Got a part number?
Third picture from bottom - http://nitrohouse.com/acces,_batteries_%26_chargers.htm
#95
Originally Posted by performula
Mugen #B0217 per Nitro House.
Third picture from bottom - http://nitrohouse.com/acces,_batteries_%26_chargers.htm
Third picture from bottom - http://nitrohouse.com/acces,_batteries_%26_chargers.htm
#96
Originally Posted by maskedrider
Hawaii.... for your update... this is my babe and my local track
#97
Based on the desire by some to keep the car "All Kyosho", I'm going to have two columns in the UE spec - one for Kyosho parts and one for non-Kyosho parts, but the non-Kyosho parts have to be equal to or better than the Kyosho part with respect to performance and durability.
For those of you that know what Zoids are, maybe I'll refer to car that isn't 100% Kyosho as the Ultimate X.
For those of you that know what Zoids are, maybe I'll refer to car that isn't 100% Kyosho as the Ultimate X.
#99
Originally Posted by carkillaii
Hawaii have you tried to reach out to any of the Kyosho team drivers for there input I think it would be a great thing to do !!!!!
I just have a feeling this site is going to be real big
I just have a feeling this site is going to be real big
#100
3racing
Originally Posted by rmdhawaii
Based on the desire by some to keep the car "All Kyosho", I'm going to have two columns in the UE spec - one for Kyosho parts and one for non-Kyosho parts, but the non-Kyosho parts have to be equal to or better than the Kyosho part with respect to performance and durability.
For those of you that know what Zoids are, maybe I'll refer to car that isn't 100% Kyosho as the Ultimate X.
For those of you that know what Zoids are, maybe I'll refer to car that isn't 100% Kyosho as the Ultimate X.
#101
bearing
i need help i need the inner & outer bearing for the clutch bell any info is appreciated or part # & order sight thanks
#102
Tech Elite
iTrader: (4)
Originally Posted by SOLOARTIST 702
i need help i need the inner & outer bearing for the clutch bell any info is appreciated or part # & order sight thanks
BRG001 SHIELD BEARING (5X10X4)4PCS $12.99 - Inner bearing
BRG002 SHIELD BEARING (5X8X2.5)4PCS $14.99 - Outer bearing
Dom
#103
bearing
Originally Posted by litespeed-dom
Here is the Kyosho part #:
BRG001 SHIELD BEARING (5X10X4)4PCS $12.99 - Inner bearing
BRG002 SHIELD BEARING (5X8X2.5)4PCS $14.99 - Outer bearing
Dom
BRG001 SHIELD BEARING (5X10X4)4PCS $12.99 - Inner bearing
BRG002 SHIELD BEARING (5X8X2.5)4PCS $14.99 - Outer bearing
Dom
#104
Tech Elite
iTrader: (4)
Originally Posted by performula
They would never complain about a company that was paying their bills.
Myself and another local Kyosho driver are running VZW207, I'm running single tower and he is running 2 regular stock towers glued together for strength.
The other options on my car is VSW007 since I run 0 degree offset rear tire, VZW211, Ti bevel shaft and VZW209 Ti spur gear layshaft.
I had a chance to look closely at drfritz's RRR with loads of 3Racing, K-Factory hopups on it last night. They look cool.
Dom
#105
Originally Posted by carkillaii
Hawaii have you tried to reach out to any of the Kyosho team drivers for there input I think it would be a great thing to do !!!!!
I just have a feeling this site is going to be real big
I just have a feeling this site is going to be real big