Tamiya TB Evolution V
#2026
Tech Initiate
Yes they fit
#2027
Tech Rookie
Anyone know if the counter steer kit for the TB03 fits in the evo5 ? If this thread is still alive? thanks! ]
#2028
Tech Apprentice
Dipesh180sx..
I have the Active Hobby counter drift STR100 and it fits..
I just needed to drill a hole on the propeller joint for the spur gear mount pin..
the TB03 and evo V spur gear mount location on the propeller joint are different..
the rest is just proper shimming..
HTH
eric
I have the Active Hobby counter drift STR100 and it fits..
I just needed to drill a hole on the propeller joint for the spur gear mount pin..
the TB03 and evo V spur gear mount location on the propeller joint are different..
the rest is just proper shimming..
HTH
eric
#2029
The following Link Show you my TRf TB EVO 5
http://www.youtube.com/watch?v=KcsaKSFgzbU
I have the TB03 R Propeller Joint with the EVO 5 Mount Gear and Motor Mount and the TRf 418 Spool Outdrives.
Enjoy and have fun with my TRF TB EVO 5 MS Exotek
http://www.youtube.com/watch?v=KcsaKSFgzbU
I have the TB03 R Propeller Joint with the EVO 5 Mount Gear and Motor Mount and the TRf 418 Spool Outdrives.
Enjoy and have fun with my TRF TB EVO 5 MS Exotek
Last edited by Simmi; 02-27-2014 at 11:15 AM.
#2030
@Jan
Now my Link it work
Now my Link it work
#2031
No Response?
Ok, I feel free to say I Change the Motor Mount from EVO 5 MS to EVO 5. I like when the car moves easily, so they did.
Now my ready car
I´m very proud to have some EVO 5 Exotek
Ok, I feel free to say I Change the Motor Mount from EVO 5 MS to EVO 5. I like when the car moves easily, so they did.
Now my ready car
I´m very proud to have some EVO 5 Exotek
#2033
Tech Master
#2034
I have to go no way races in the area, because we have only one outdoor track which can only be visited in late March, when the weather cooperates.
Now on 8 and 9 March, I'll have the opportunity to test at a model show. Have everything rebuilt when I got the car. Can not tell you how the car was before.
It's not funny if you do not have indoor tracks around the corner.
And time also plays a negative role.
Now on 8 and 9 March, I'll have the opportunity to test at a model show. Have everything rebuilt when I got the car. Can not tell you how the car was before.
It's not funny if you do not have indoor tracks around the corner.
And time also plays a negative role.
#2035
Tech Master
iTrader: (11)
I have to go no way races in the area, because we have only one outdoor track which can only be visited in late March, when the weather cooperates.
Now on 8 and 9 March, I'll have the opportunity to test at a model show. Have everything rebuilt when I got the car. Can not tell you how the car was before.
It's not funny if you do not have indoor tracks around the corner.
And time also plays a negative role.
Now on 8 and 9 March, I'll have the opportunity to test at a model show. Have everything rebuilt when I got the car. Can not tell you how the car was before.
It's not funny if you do not have indoor tracks around the corner.
And time also plays a negative role.
What did you use fit the lipo mount if you don't mind me asking?
#2036
@b20btec
I use the Awesomatix Lipo Mount and mixed with Exotek.
I use the Awesomatix Lipo Mount and mixed with Exotek.
#2037
Here my First Setup Sheet.
Very nice driving with all Parts from the 418
Very nice driving with all Parts from the 418
#2040
Thank you b20btec
Now the outdoor season begins where I can properly test and finally can go whenever I want and have time. The club track is almost in front of my door.
I look Forward
I have only driven the EVO and the 418 indoor and only two days long, that`s all. But must say the EVO went really well and fast. To measure lap times I did not come, first had to find a good setup for both cars.
I see you have attached a fan and how? Did not see? I have a MuchMore Fan 40x40 and MuchMore fan mount on. Does not fit well but it`s ok.
Now the outdoor season begins where I can properly test and finally can go whenever I want and have time. The club track is almost in front of my door.
I look Forward
I have only driven the EVO and the 418 indoor and only two days long, that`s all. But must say the EVO went really well and fast. To measure lap times I did not come, first had to find a good setup for both cars.
I see you have attached a fan and how? Did not see? I have a MuchMore Fan 40x40 and MuchMore fan mount on. Does not fit well but it`s ok.