BANZAI Motors
05-03-2006, 07:48 AM
#121
Judi- Yodel! I sent you an e-mail! Hows things in CA?
Curtis and I have the Indiana Indoor Champs this upcoming weekend, this race will be a small warmup for the Mod Nats, should be fun!
Curtis and I have the Indiana Indoor Champs this upcoming weekend, this race will be a small warmup for the Mod Nats, should be fun!
05-03-2006, 08:04 AM
#122
Jeremy,
IIC race in Las Vegas is Sept 19th-24th. I'm signed up and ready for Vegas. Won't be much sleep that week. Hopefully there will be some more Banzai guys there.
Judi I think you and Scott need a vacation to Las Vegas that weekend!
Greg.....
IIC race in Las Vegas is Sept 19th-24th. I'm signed up and ready for Vegas. Won't be much sleep that week. Hopefully there will be some more Banzai guys there.
Judi I think you and Scott need a vacation to Las Vegas that weekend!
Greg.....
05-03-2006, 09:32 AM
#123
Jeremy - Im heading up to the Mod nats as well man. I will be getting in sometime on the Tuesday before. They are running slicks up there? Hey what is your E-mail man? Drop me a line.
[email protected]
-EG
[email protected]
-EG
05-03-2006, 12:00 PM
#124
I had some CRCRC stuff come up and i'm unable to make it over to the Indy State Race this weekend....
Curtis
Curtis
05-03-2006, 03:58 PM
#125
Eddie- I hear its slicks with specific types of traction additives/break in procedures. If I don't get to your email first mine is [email protected]
Yeti- I'd really love to go to that race but I think the 1/8th scale nats are that weekend and I'll be there working.
Yeti- I'd really love to go to that race but I think the 1/8th scale nats are that weekend and I'll be there working.
05-03-2006, 04:04 PM
#126
Jeremy,
That's to bad cause I'd be willing to bet we would be able to find something fun to do besides race - just a guess.
Greg.....
That's to bad cause I'd be willing to bet we would be able to find something fun to do besides race - just a guess.
Greg.....
05-03-2006, 06:03 PM
#128
Casper- My bad...I always get our neighbors to the north confused.
Yetiman- I just consulted the race board and noticed that its actually the roar gas truck nats that happen the same weekend as the IIC. I don't know if I need to be at that but I'll bet the IIC is already sold out anyways...oh well, anybody up for snowbirds?
Yetiman- I just consulted the race board and noticed that its actually the roar gas truck nats that happen the same weekend as the IIC. I don't know if I need to be at that but I'll bet the IIC is already sold out anyways...oh well, anybody up for snowbirds?
05-03-2006, 06:05 PM
#129
Did I say snowbirds? I meant us indoor champs. Sheesh, I'm on a roll.
05-03-2006, 07:29 PM
#130
Tech Regular
I got my Blue 27 today!
Yippee!! I can hadly wait to get it on the track.
I was looking over the motor and noticed that the coolong ports on one side are covered by the Bazai sticker.
Should I open those ports up or leave it?
Yippee!! I can hadly wait to get it on the track.
I was looking over the motor and noticed that the coolong ports on one side are covered by the Bazai sticker.
Should I open those ports up or leave it?
05-03-2006, 09:46 PM
#131
My name is Keith Whisler and I'm the owner of Slingshot Batteries here in Southern California . Judi had asked me to come on here to introduce myself. I sponsor a few of the Banzai drivers here in SoCal and want to let you all know that I'm available to answer any questions you may have about batteries. I was lucky enough to meet Judi and Scott a little over year ago and our relationship has grown since we have some common "team drivers". Feel free to contact me regarding batteries or visit my website (under construction) at www.slingshotbatteries.com Or if you happen to be in Southern California at any of the JBRL off road races, you can find me running around with the Banzai crew...... 
And yes, I run Banzai motors too...... 
Keith Whisler--Slingshot Batteries
And yes, I run Banzai motors too...... Keith Whisler--Slingshot Batteries
05-04-2006, 04:40 AM
#132
I usually carefully cut out just the openings with an exacto knife. Not sure how much a difference it makes (never tested with cutout outs and without) but it is not hard to do. I would recommend taking the arm out of the can to do this just to make sure you do not stab the windings on the arm while you do this.
Welcome Keith!
Welcome Keith!
05-04-2006, 05:03 PM
#133
Tech Regular
C-Man:
Thanx for the tip!
and BTW: my view of this board sez you posted at 0430 hrs (PST). Were you REALLY up that early reading this board????
Thanx for the tip!
and BTW: my view of this board sez you posted at 0430 hrs (PST). Were you REALLY up that early reading this board????
Originally Posted by Casper
I usually carefully cut out just the openings with an exacto knife. Not sure how much a difference it makes (never tested with cutout outs and without) but it is not hard to do. I would recommend taking the arm out of the can to do this just to make sure you do not stab the windings on the arm while you do this.
05-04-2006, 08:38 PM
#135
Hey Chaz, go get 'em now with that motor! Casper will be proud!! 
Scott has always run his with the holes covered. He says motor guys like to be able to read the whole label.
Keith, welcome to our thread!! This is great fun and all my guys are really terrific!! Will see you soon at the Pegasus race.
Jason is home from vacation!! He'll be back to work Monday! So Banzai is back at full strength!!
Judi
Scott has always run his with the holes covered. He says motor guys like to be able to read the whole label.
Keith, welcome to our thread!! This is great fun and all my guys are really terrific!! Will see you soon at the Pegasus race.
Jason is home from vacation!!
He'll be back to work Monday! So Banzai is back at full strength!!Judi
Last edited by BanzaiMom; 05-04-2006 at 08:50 PM.