PipeMagnet Custom Power Supplies
#1
PipeMagnet Custom Power Supplies
Hello. I am an 18 year old high school senior. I am selling these to help fund my racing. I am not a business or a company.
I am offering custom-built power supplies configured to your liking. These units will comfortably do 20 amps on the 12v line with some cushion above that. I can also add 5v and 3v jacks which will do 25 amps each. The 5v and 3v jacks work great for running in motors and powering lathes right off of the PS itself. I include an LED fan for good looks. I have red, blue, and green fans.
These supplies are very safe. They will shut down if overloaded, shorted out, or if they overheat. They work on both 120/240 volt outlets. They measure about 6x6x3inches.
I went to the track and hooked up 3 chargers running at 7 amps, a motor on the 3v line, and a motor on the 5v line and the unit would NOT shut down. These are pretty beefy units.
I have sold over 40 of these supplies in the past with great results. However, due to their unique design there are a couple of chargers that do not work with the units. Futaba chargers are not compatible. The unit works on MOST tire truers.
If you're not satisfied I will do my best to make you so.
I am offering these units for $50 base model. A base model includes one colored fan and one set of jacks. Each additional set of jacks (extra 12v, 3v, 5v) can be added for $5 a pair. I can add another colored fan to the back of the unit for another $5. All domestic shipping is $12. For example, the pictured unit will sell for $77 SHIPPED......$50 base, 3x$5 for additional jacks, $12 shipping.
I have both BLACK units and CHROME units. Pictures of each are shown below. BLACK units come only with the fan pictured. CHROME units can come with red,blue,or green fans.
The pictures really don't show the brilliance of the fans! They are BRIGHT!
I accept paypal, please send any questions to [email protected]
Thanks guys!
I am offering custom-built power supplies configured to your liking. These units will comfortably do 20 amps on the 12v line with some cushion above that. I can also add 5v and 3v jacks which will do 25 amps each. The 5v and 3v jacks work great for running in motors and powering lathes right off of the PS itself. I include an LED fan for good looks. I have red, blue, and green fans.
These supplies are very safe. They will shut down if overloaded, shorted out, or if they overheat. They work on both 120/240 volt outlets. They measure about 6x6x3inches.
I went to the track and hooked up 3 chargers running at 7 amps, a motor on the 3v line, and a motor on the 5v line and the unit would NOT shut down. These are pretty beefy units.
I have sold over 40 of these supplies in the past with great results. However, due to their unique design there are a couple of chargers that do not work with the units. Futaba chargers are not compatible. The unit works on MOST tire truers.
If you're not satisfied I will do my best to make you so.
I am offering these units for $50 base model. A base model includes one colored fan and one set of jacks. Each additional set of jacks (extra 12v, 3v, 5v) can be added for $5 a pair. I can add another colored fan to the back of the unit for another $5. All domestic shipping is $12. For example, the pictured unit will sell for $77 SHIPPED......$50 base, 3x$5 for additional jacks, $12 shipping.
I have both BLACK units and CHROME units. Pictures of each are shown below. BLACK units come only with the fan pictured. CHROME units can come with red,blue,or green fans.
The pictures really don't show the brilliance of the fans! They are BRIGHT!
I accept paypal, please send any questions to [email protected]
Thanks guys!
Last edited by PipeMagnet; 03-16-2006 at 09:35 AM.
#2
TTT!
#5
nick come down to the track this weekend
#6
What time Mikey? Holler at me 620-200-2059....got that sprinter running yet?
#7
Tech Addict
iTrader: (10)
Originally Posted by PipeMagnet
I have sold over 40 of these supplies in the past with great results. However, due to their unique design there are a couple of chargers that do not work with the units. Futaba and Duratrax ICE chargers are not compatible. The unit works on MOST tire truers.
#8
Tech Master
iTrader: (10)
I bought 2 from Nick. One for me and a friend. We have not had any problem with any of them except you need to turn it off before plugging anything into them. So I added a shut off to all the outlets so I don’t have to turn off the power supply during charging. I run 4 chargers off mine as I share my power supply with others.
Good work Nick.
Good work Nick.
#9
anytime should be down there when they open i just got on this site so little to late to call..lol no dont have the sprint car together yet this thing is going together horrible. lot of problems wrong stuff packaged, or missing stuff all together, no threads in some of the stuff. instructions are horrible if i had built one before or owned one it probably would be cake but since i havent it is not fun..
#10
Post edited. They DO work with ICE, I must have been confused. Mike I'll try and make it down. Thanks guys!
Last edited by PipeMagnet; 02-11-2006 at 09:47 AM.
#11
TTT
#12
Originally Posted by PipeMagnet
Post edited. They DO work with ICE, I must have been confused. Mike I'll try and make it down. Thanks guys!
#13
$10 off each model for these three units!
#15
Hey guys just talked to my supplier.....I can get gloss black supplies instead of the chrome! What do you think? They have a bigger fan on the top and none on the back. They are a gloss black all over. I think they will look cleaner once put together......you guys decide.....BLACK OR CHROME ?