The Speed Passion Thread
#9406
Tech Fanatic
iTrader: (10)
We are phasing out the 1S version and have the MMM to replace the 1S. V3 Competition version will still be there for the spec level of racing. For anything else, it is all MMM.
The reason why 17.5 are out is...(1) Special material like the ROTOR raised 3X the price since last year. (2) Beside USA, alot of other country are adapting 17.5 as a stock or slower class and this class is heavily popular and demand are high. (3) MFR are way behind their schedule that is totally out of our control.
Only in NORWAY? LOL...QC is always a concern especailly we are talking about ESC that if used heavily, it will burn. But I believe those are individual cases, that happened to any ESC and any one. We are continuously updating the software and hardware and keep making sure the REVENTON ESC that coming in USA are up to the standard, at least, my standard. The past 3 months I have turned over at least 4 different version of REVENTON and that is the reason why there is a delay. If they are not up to my standard, I won't let it run in USA.
We are mainly concentrated on the ZERO TIMING software and hardware of the ESC and I have to make sure ROAR is align with us (they are very close to be approved) but over in Europe they are mainly run on MOD and BOOST application which it is alot easier to get the ESC fried...
The reason why 17.5 are out is...(1) Special material like the ROTOR raised 3X the price since last year. (2) Beside USA, alot of other country are adapting 17.5 as a stock or slower class and this class is heavily popular and demand are high. (3) MFR are way behind their schedule that is totally out of our control.
Only in NORWAY? LOL...QC is always a concern especailly we are talking about ESC that if used heavily, it will burn. But I believe those are individual cases, that happened to any ESC and any one. We are continuously updating the software and hardware and keep making sure the REVENTON ESC that coming in USA are up to the standard, at least, my standard. The past 3 months I have turned over at least 4 different version of REVENTON and that is the reason why there is a delay. If they are not up to my standard, I won't let it run in USA.
We are mainly concentrated on the ZERO TIMING software and hardware of the ESC and I have to make sure ROAR is align with us (they are very close to be approved) but over in Europe they are mainly run on MOD and BOOST application which it is alot easier to get the ESC fried...
I had no clue about the motors. Can we expect a price increase due to your increased cost? If so, How much can we expect?
#9407
Tech Addict
Solara,
Thank you for the quick reply...
Thank you for the quick reply...
#9408
Tech Champion
iTrader: (17)
I thought it was ironic also... besides what conditions are they running it under? Probably deliberately into the ground to see what it can handle. I prefer to ask you (who has always been honest, and attack questions head on.) That is the reason I will continue to support SpeedPassion. Your customer service is light years above the rest.
I had no clue about the motors. Can we expect a price increase due to your increased cost? If so, How much can we expect?
I had no clue about the motors. Can we expect a price increase due to your increased cost? If so, How much can we expect?
#9409
quick question, does speed passion make a 1/10 scale esc that can handle a 2.5 turn motor?
#9411
#9415
Tech Fanatic
iTrader: (10)
No...not a dime more on price. But, in order to keep the price the same, we have to come up with a higher amount of orders, when we placed the high amount of orders, it take time to get it fabricated. I am doing my best to fight for the quantities of the MMM motor against other countries like Europe and Japan, but I am going my best to bring them in...
Solara, I was wondering, the ceramic bearings are sold in single pieces, but doesnt the motor take 2? Is there a reason they are sold in single parts?
Also any rotor avail for the 17.5r MMM? I need more powah!
#9416
Tech Champion
iTrader: (17)
If we sell the bearing in pair, we will charge you double...LOL
We are selling it in single package because we can sell them for those who need just 1 for replacement....if you need 2, just buy 2 package. No specific reason why you just need 1 instead of 2...you will need 2.
For ROTOR...only if you have a big track, try the SUPER 7 silver purple rotor, that is the ONLY optional rotor that I will use beside the stock MMM 17.5 black purple.
http://www.speedpassion.net/us/produ...S13802NA&c=MTR
#9417
Tech Fanatic
iTrader: (10)
You buy that motor ASAP....we don't even have any.
If we sell the bearing in pair, we will charge you double...LOL
We are selling it in single package because we can sell them for those who need just 1 for replacement....if you need 2, just buy 2 package. No specific reason why you just need 1 instead of 2...you will need 2.
For ROTOR...only if you have a big track, try the SUPER 7 silver purple rotor, that is the ONLY optional rotor that I will use beside the stock MMM 17.5 black purple.
http://www.speedpassion.net/us/produ...S13802NA&c=MTR
If we sell the bearing in pair, we will charge you double...LOL
We are selling it in single package because we can sell them for those who need just 1 for replacement....if you need 2, just buy 2 package. No specific reason why you just need 1 instead of 2...you will need 2.
For ROTOR...only if you have a big track, try the SUPER 7 silver purple rotor, that is the ONLY optional rotor that I will use beside the stock MMM 17.5 black purple.
http://www.speedpassion.net/us/produ...S13802NA&c=MTR
What are the benefits of the super 7?