Best pre glued tires
#1
Best pre glued tires
At our last race the track was super sticky and I rolled the tires off the rims on proline preglued bowties and crimefighters truggy tires both new, and a buddy did the same thing with a new set of losi truggy tires are there any preglues that are worth using or do you have to glue them your self to get them last. Mark,
#2
going to try the aka premounts
#3
Haven't seen any truggy AKA tires yet, has anyone used regular model glue on tires?
#4
Haven't seen the AKA premounts yet but the best I've come across so far are the GRP premounts.
#5
.
Last edited by gameholic2; 09-30-2008 at 05:26 AM. Reason: Double post.
#6
+ 1 for grp, their Premounted tires are solid never seen anyone have any kind of problems with them.
The Proline premounts have gotten better over the years but there's always the off chance that they will come loose, if you want to run proline the safe bet is to glue them yourself.
The Proline premounts have gotten better over the years but there's always the off chance that they will come loose, if you want to run proline the safe bet is to glue them yourself.
#7
Tech Elite
iTrader: (1)
Join Date: Oct 2007
Location: Fort Worth, Texas, USA, North America, Earth, Solar System, Milky Way Galaxy, Universe
Posts: 4,034
Trader Rating: 1 (100%+)
Not sure what you mean by "regular model glue." Tires should be glued with CA (commonly known as "Super Glue" since that was the first brand) I personally like the thin, instant cure stuff.
#8
Tech Regular
iTrader: (23)
It certainly isn't any Losi tire. I haven't had one set yet in 6 sets that has stayed glued. I have gone through a few sets of GRP Cubics and have had no issues. So far so good on the Prolines also. I'm to the point of paying somebody that knows how to glue tires to do my Losi buggy tires. Everytime I glue them I make a mess out of the tires and my fingers.
#10
Just build your own, atleast half of the Proline/Losi premounts I've bought have fallen apart after 1 heat. It may be annoying to do but it isn't hard or impossible by any means. And if you do it right they won't come apart.
#12
Tech Adept
i just looked on cens website and didnt see the beadlocks
#13
Tech Lord
iTrader: (52)
Here's the photo from another thread. I sent a PM to the guy who owns the truggy. I will post where to buy em if he hits me back
http://www.rctech.net/forum/nitro-of...h-scale-2.html
http://www.rctech.net/forum/nitro-of...h-scale-2.html
#15
Tech Lord
iTrader: (52)
found em! Here's a link they only come in Black or Green
http://www.rc-nation.com/prod_display/114/1.php
http://www.rc-nation.com/prod_display/114/1.php