eXpress Motorsports
#1097
Tech Master
iTrader: (12)
Originally posted by xtreme75x
Here's some result's from this past weekend at Mike's in Texas, looks like Steve had a fair amount of heat to run agains.
02/27/2005 Race # 4 - A Main - 19 Turn Sedan
Mike's Hobby Shop - Website: http://www.mikeshobbyshop.com
--------------------------------------------------------------------------------
Pos. Car Driver's Name
1 5 Steve Eaves
2 2 Quincy Hughs
3 4 David Green
4 3 Bobby Beck
5 7 Larry Bradshaw
6 1 Mike Dumas
7 6 Rocco Margiotta
Here's some result's from this past weekend at Mike's in Texas, looks like Steve had a fair amount of heat to run agains.
02/27/2005 Race # 4 - A Main - 19 Turn Sedan
Mike's Hobby Shop - Website: http://www.mikeshobbyshop.com
--------------------------------------------------------------------------------
Pos. Car Driver's Name
1 5 Steve Eaves
2 2 Quincy Hughs
3 4 David Green
4 3 Bobby Beck
5 7 Larry Bradshaw
6 1 Mike Dumas
7 6 Rocco Margiotta
Jon- YGPM
TK
#1098
Tech Champion
iTrader: (30)
Originally posted by Tyler Keel
Now thats straight up Redneck! Though I have been known to put circa. 1995 Shumacher front pins on some Losi fronts with a rear buggy foam to get more steering into the corner on a dry track
TK
Now thats straight up Redneck! Though I have been known to put circa. 1995 Shumacher front pins on some Losi fronts with a rear buggy foam to get more steering into the corner on a dry track
TK
#1099
Tech Champion
iTrader: (22)
TK you have no idea!!!! on my XXX the front tire of choice was take 4wd front holeshots and cut two rows out and then glue them back together. also works well with red taper pins, although I think now losi is actually making taper pin front tires. I think the best ones are square fuzzies cut down but they wear very fast. Dialed.
#1100
Tech Master
iTrader: (12)
Haha! You guys kill me...Seriously don't put those Shumacher Pins on the front...this track was dry with no blue groove...I had to do something!
Bob- The dialed tire for stock nats in 4WD was to sit and take the tire and trim every row off of teh holeshots...Very time consuming...a buddy of mine had me on trim duty with his tires that weekend...Atleast he made the A...I figure I had a little to do with it
TK
Bob- The dialed tire for stock nats in 4WD was to sit and take the tire and trim every row off of teh holeshots...Very time consuming...a buddy of mine had me on trim duty with his tires that weekend...Atleast he made the A...I figure I had a little to do with it
TK
#1102
PUNKY
Just noticed, its PUNKY's B DAY. No wonder hes quiet.
#1105
Tech Champion
iTrader: (42)
John , Sounds cool. You should swing by the Nats
We will be racing at Hobby Chamber this weekend (all) and next week we will be preparing for the nats. changing bearings and all the pm work. But I will stop by the ORL at DC next sunday if your gona be there. I have a few drivers there I am going to support and tune for,so I will see you there.
We will be racing at Hobby Chamber this weekend (all) and next week we will be preparing for the nats. changing bearings and all the pm work. But I will stop by the ORL at DC next sunday if your gona be there. I have a few drivers there I am going to support and tune for,so I will see you there.
#1108
Tech Regular
I should be in attendance at the event on the 13th as well. Look for me near the trash can in the back room area! But please no one toss me into the bin, I hate when you all do that!
Tag: What's a rental car?
Tag: What's a rental car?
#1109
danny yer not allowed im the back room;strictly sponsored people only,and keith. j/k just not next to me!