Convert your starter box to LiPo
#1
Convert your starter box to LiPo
#3
I suppose the foam would help protect the lipo if you were to drop your box.
#4
I converted my Mugen Starter Box to LiPo as well, using two Hobby King Flightmax 4000mAh 2s 25c hard case packs. I have to admit, I should have done it earlier. It's truly amazing how much more power my box has. I no longer fear breaking in new engines (although I do pre-heat them of course).
Nice side-effect: these packs can be run in my Associated B4 buggy, too!
Nice side-effect: these packs can be run in my Associated B4 buggy, too!
#6
Yes the foam insert is to protect the battery if the box fall.
#7
Iam just in the process of changing my starter box and i will be using a 4S 20C 2650mAh Lipo with deans plugs and also a low voltage buzzer/alarm just to make sure iam not killing the lipo.
#8
Super Moderator
iTrader: (63)
Join Date: May 2005
Location: a very small town in wisconsin that is in the middle of absolutely no where
Posts: 5,155
Trader Rating: 63 (100%+)
here is my starter box that i use for both truggy and buggy.. wife made the little pouch for the needed tools if the normal ones go walking off by another racer... jeremy
#9
You'll be amazed by the performance...
#12
rather than convert the starter box to lipo, why not convert the car to lipo?
http://www.rctech.net/forum/electric...onversion.html
http://www.rctech.net/forum/electric...onversion.html
#14