TLR TEN-SCTE 2.0 Kit Thread
#1066
#1068
#1071
Nice, I hope to have mine on monday!
#1073
So what complete set of tools will I need to assemble the 2.0, is it the standard 1.5mm, 2mm, 2.5mm, 3mm, and 4mm hex drivers
#1074
#1075
alright thanks
#1076
Tech Regular
iTrader: (6)
Picking one up on Tues. One question...besides electrics, what will I need to complete the build according to the setup posted on page 1? Does it come with the sway bars and shock springs that are listed in Ryan's setup? I see some sort of shock pistons people are mentioning...are the stock pistons not good enough? Possible to compensate with heavier shock oil?
I have a SCTE 1.0 RTR already with the TLR Tuning kit, Savox Servo, KH motor mount, diff mount and chassis. It has the stock RTR motor. I will likely swap all the electrics over to the 2.0 for now. I plan on getting the new Tekin Pro4 HD motor when it comes out.
But to get it ALL done, what do I need to get it to the hot setup that doesn't come in the kit already?
I have a SCTE 1.0 RTR already with the TLR Tuning kit, Savox Servo, KH motor mount, diff mount and chassis. It has the stock RTR motor. I will likely swap all the electrics over to the 2.0 for now. I plan on getting the new Tekin Pro4 HD motor when it comes out.
But to get it ALL done, what do I need to get it to the hot setup that doesn't come in the kit already?
#1077
Picking one up on Tues. One question...besides electrics, what will I need to complete the build according to the setup posted on page 1? Does it come with the sway bars and shock springs that are listed in Ryan's setup? I see some sort of shock pistons people are mentioning...are the stock pistons not good enough? Possible to compensate with heavier shock oil?
I have a SCTE 1.0 RTR already with the TLR Tuning kit, Savox Servo, KH motor mount, diff mount and chassis. It has the stock RTR motor. I will likely swap all the electrics over to the 2.0 for now. I plan on getting the new Tekin Pro4 HD motor when it comes out.
But to get it ALL done, what do I need to get it to the hot setup that doesn't come in the kit already?
I have a SCTE 1.0 RTR already with the TLR Tuning kit, Savox Servo, KH motor mount, diff mount and chassis. It has the stock RTR motor. I will likely swap all the electrics over to the 2.0 for now. I plan on getting the new Tekin Pro4 HD motor when it comes out.
But to get it ALL done, what do I need to get it to the hot setup that doesn't come in the kit already?
#1078
Picking one up on Tues. One question...besides electrics, what will I need to complete the build according to the setup posted on page 1? Does it come with the sway bars and shock springs that are listed in Ryan's setup? I see some sort of shock pistons people are mentioning...are the stock pistons not good enough? Possible to compensate with heavier shock oil?
I have a SCTE 1.0 RTR already with the TLR Tuning kit, Savox Servo, KH motor mount, diff mount and chassis. It has the stock RTR motor. I will likely swap all the electrics over to the 2.0 for now. I plan on getting the new Tekin Pro4 HD motor when it comes out.
But to get it ALL done, what do I need to get it to the hot setup that doesn't come in the kit already?
I have a SCTE 1.0 RTR already with the TLR Tuning kit, Savox Servo, KH motor mount, diff mount and chassis. It has the stock RTR motor. I will likely swap all the electrics over to the 2.0 for now. I plan on getting the new Tekin Pro4 HD motor when it comes out.
But to get it ALL done, what do I need to get it to the hot setup that doesn't come in the kit already?
#1079
http://www.amainhobbies.com/product_...FcZ_Qgod-VwAwA
Also this thread was pretty dead today haha I was hoping to see more pics and what not, I'm not getting mine till next week cause I ordered it last Thursday
Last edited by XRated SCT; 03-02-2013 at 08:59 PM.
#1080