Velocity Sprint Car Conversion For Team Associated B4
#1
Velocity Sprint Car Conversion For Team Associated B4
Hey guys, thought you all might want to check out the new sprint car conversion kit from Velocity RC. If you have any questions feel free to ask!
#3
Very tempting!!!
#4
I found the website but I do not see how to order one. Also are there any suggestions on a body/cage kit? I've got a FTB4.1 sitting around collecting dust...
-Joe
-Joe
#5
On the left side of the home page is a tab labeled "items", click that, then click kits and you will see the option to put the kit into the shopping cart.
Most of the guys have been using Custom Works cage/body, etc.
What type of surface do you run on?
#6
Got any video?
#8
-Joe
#9
Yes the Big Bores will work, they suggest running front shocks all the way around but will work with rear shocks too...
#10
So these will convert whichever car you choose between b4,b4.1, or b4.2? Thanks have a dirt oval stating up next spring and this might be what I'm looking for to build over the winter!!
#11
Tim - Working on Video, if you search for the 2013 KDOC there are two cars in that video.
Chester - Yes, from the very first B4 kit all the way through the B4.2 Factory Team.
Chester - Yes, from the very first B4 kit all the way through the B4.2 Factory Team.
#12
havin trouble findin the site. All I get is airplane stuff.
#13
nevermind. found it.
#14
Tech Addict
iTrader: (10)
Yes, but the real question is "why would you want to use them?" Your best bet is to use Associated B4.1 front shocks on all 4 corners with either CustomWorks or RC For Less Long springs in the 3 to 7 Lb range unless you want to spring for CW MDX long or IRS long shocks.
Last edited by GP40X; 09-03-2013 at 05:20 PM.