newbie, and exhaust Q
#1
newbie, and exhaust Q
hey, im new on the forum, but have been into RC nitro trucks for about 2 years, im 16 so, i don't know much.
Im running a TRX 2.5 in a custom chassis(aluminum) with a mix of blue anodized aluminium and plastic, as well as a custom exhaust..
i want to change the Exhaust so it's sounds deeper (like aftermarket exhaust on a car). Right now it's your typical high pitched sqeaul. is it even possible to make an exhaust like this? How couldm i go about doing this?
Thank you,
Xavier
Im running a TRX 2.5 in a custom chassis(aluminum) with a mix of blue anodized aluminium and plastic, as well as a custom exhaust..
i want to change the Exhaust so it's sounds deeper (like aftermarket exhaust on a car). Right now it's your typical high pitched sqeaul. is it even possible to make an exhaust like this? How couldm i go about doing this?
Thank you,
Xavier
#2
its a two stroke you cant really get that deep rumble like out of a 4 poke but try some exhausts i guess but you are probably going to live with the sound
#4
would it be possible to make a custom one, with a 1/2 inch from the engine, then to a 1 inch body wiht baffleing(and hole for backpressure line) and then to a 3/4(or slightly smaller) output ? would that help
#5
Is this a stock TRX pipe? If it is get the single chamber TRX pipe and if you don't race bore out the stinger.
#6
no, i bought used with a cracked(didn't know till i washed with acetone) alum. exhaust, with that it's 1/4inch to 1inch(bore) to 1/4inch output... it's a shitty thing, but i got it all for like 100$ a year and a half ago..
#7
if im following you the output is the stinger. I take the quarter inch is outer diameter? Sounds like a big block pipe.
#8
what do you mena by stinger?? is that the stock exhaust?
#9
Does it have a name on the pipe?
#10
The stinger is where the actual exhaust would come out at. You got a header, then the "pipe" and the stinger comes off of the pipe.
#11
no, what's mounted on it now is a custom alum. one, the stock black one came with it if i wanted to put it back on.
i'd post pictures, but the site has a min. # of posts needed -.-
i'd post pictures, but the site has a min. # of posts needed -.-
#12
Custom? Would take a hella CNC machine for that.
#13
not CNC, welded alum. it's weird i know, the sound wails like and SoB..
#14
I would personally put the OG pipe back on it. Alot of science in tuned pipes and for one to just make one could really hurt performance.
#15
so the OG, is the stock one?