Shepherd Velox V8 "EC" 1/8th Car
#136
BigC: If I were you, i`d look at other 1/8 brands setup sheets also. The good set up is very much dependent on the traction, tires and general team planning...
Usually guys new to shepherd run very stiff rear end 800/ 1000 oil in rear shocks and 3mm anti roll bar. When their lap times start to improve they just add rear toe in. we had just +40 EC in Sweden, The winner -mugen second- Shepherd and third_ serpent had all very similar set ups The outcome of the race between 1st and second was determined by tactics. The second place guy switched tires in the closing stages of final and the winner gambled- He did not...
Usually guys new to shepherd run very stiff rear end 800/ 1000 oil in rear shocks and 3mm anti roll bar. When their lap times start to improve they just add rear toe in. we had just +40 EC in Sweden, The winner -mugen second- Shepherd and third_ serpent had all very similar set ups The outcome of the race between 1st and second was determined by tactics. The second place guy switched tires in the closing stages of final and the winner gambled- He did not...
#140
Tech Rookie
Another win for Simon Kurtzbuch in ENS/Aigen. Car: perfectly stock Velox V8 WC/SK edition...
#141
#144
#145
Tech Champion
iTrader: (102)
Bearings are: https://www.brilliant-rc.com/brilliant-rc-bearing-sets
They are not rubber sealed, so less friction. These are endorsed by Shepherd, and I believe they are steel not ceramic. I think the only ceramics they have are diff balls for electric cars.
#146
Ti-bits are screw set
Bearings are: https://www.brilliant-rc.com/brilliant-rc-bearing-sets
They are not rubber sealed, so less friction. These are endorsed by Shepherd, and I believe they are steel not ceramic. I think the only ceramics they have are diff balls for electric cars.
Bearings are: https://www.brilliant-rc.com/brilliant-rc-bearing-sets
They are not rubber sealed, so less friction. These are endorsed by Shepherd, and I believe they are steel not ceramic. I think the only ceramics they have are diff balls for electric cars.
#147
Tech Adept
Hello,
yes our Brilliant bearings are steel-beraings.
These are very high quality bearings with less friction then most ceramic on the market.
Also for the 1/8 scale they are near to maintance-free. We put them in and use them for a whole season.
That explains the high price.
Greetings
yes our Brilliant bearings are steel-beraings.
These are very high quality bearings with less friction then most ceramic on the market.
Also for the 1/8 scale they are near to maintance-free. We put them in and use them for a whole season.
That explains the high price.
Greetings
#148
Tech Rookie
And dear I/C fan: The aluminum axles , aluminum small bearing adapters and bearings are "stock" included in the kit: Go to Shepherd Micro Racing website to learn all the features of Simon`s car...
#149
Tech Rookie
Simon is now running in France WC a perfectly stock "Kurtzbuch Signature" car..
#150