What should I buy Re: New Motor
#1
What should I buy Re: New Motor
I had a Axe Rossi Mamba x1 which blew up. I had to mill the sleeve out of the block. I also think the block somehow got bent. Tried putting a new sleeve in it and it would not fit. I didn't want to force for fear the pressure would bend the sleeve causing more problems.
Hence, I need a new motor.
I am looking at motors below:
Nova Rossi Plus 4 (Kinda Expensive)
RB Concept 10 (Also kinda Expensive)
RB Mods motor (O.K.)
Werks B5 Hmm. I have a collar b3 and a Werks B7 (Just got the B7 to finally Idle correctly, needed a new bearing and needed to be resealed)
I still have a Rossi LSK, Rossi Black Magic. LSK still won't idle correctly (air leak after new bering installed) and the black magic needs a front bearing)
What do you folks think.
I hear good things about the Nova Ross, and the Werks.
I haven't heard anything about the RB Concept 10. Would like info on this one.
Thanks
Oh Yeah. BTW. Which one will I be able to get parts easily down the road.
Thanks again.
Hence, I need a new motor.
I am looking at motors below:
Nova Rossi Plus 4 (Kinda Expensive)
RB Concept 10 (Also kinda Expensive)
RB Mods motor (O.K.)
Werks B5 Hmm. I have a collar b3 and a Werks B7 (Just got the B7 to finally Idle correctly, needed a new bearing and needed to be resealed)
I still have a Rossi LSK, Rossi Black Magic. LSK still won't idle correctly (air leak after new bering installed) and the black magic needs a front bearing)
What do you folks think.
I hear good things about the Nova Ross, and the Werks.
I haven't heard anything about the RB Concept 10. Would like info on this one.
Thanks
Oh Yeah. BTW. Which one will I be able to get parts easily down the road.
Thanks again.
#2
Tech Fanatic
iTrader: (2)
I had a Axe Rossi Mamba x1 which blew up. I had to mill the sleeve out of the block. I also think the block somehow got bent. Tried putting a new sleeve in it and it would not fit. I didn't want to force for fear the pressure would bend the sleeve causing more problems.
Hence, I need a new motor.
I am looking at motors below:
Nova Rossi Plus 4 (Kinda Expensive)
RB Concept 10 (Also kinda Expensive)
RB Mods motor (O.K.)
Werks B5 Hmm. I have a collar b3 and a Werks B7 (Just got the B7 to finally Idle correctly, needed a new bearing and needed to be resealed)
I still have a Rossi LSK, Rossi Black Magic. LSK still won't idle correctly (air leak after new bering installed) and the black magic needs a front bearing)
What do you folks think.
I hear good things about the Nova Ross, and the Werks.
I haven't heard anything about the RB Concept 10. Would like info on this one.
Thanks
Oh Yeah. BTW. Which one will I be able to get parts easily down the road.
Thanks again.
Hence, I need a new motor.
I am looking at motors below:
Nova Rossi Plus 4 (Kinda Expensive)
RB Concept 10 (Also kinda Expensive)
RB Mods motor (O.K.)
Werks B5 Hmm. I have a collar b3 and a Werks B7 (Just got the B7 to finally Idle correctly, needed a new bearing and needed to be resealed)
I still have a Rossi LSK, Rossi Black Magic. LSK still won't idle correctly (air leak after new bering installed) and the black magic needs a front bearing)
What do you folks think.
I hear good things about the Nova Ross, and the Werks.
I haven't heard anything about the RB Concept 10. Would like info on this one.
Thanks
Oh Yeah. BTW. Which one will I be able to get parts easily down the road.
Thanks again.
#3
#4
is it for a Buggy or a Truggy ?
#5
If its for a buggy i would say Werks B6 If its for truggy Werks B5 i have had great luck with both.
#7
Mugen Ninja
I have a Ninja but, I need a New Pistion/sleeve for it.
This is not the JX model b ut the earlier Rossi built model.
Hard to find.
I also have a Ninja and a Werks for my Truggy.
The Werks motor just got rebuilt, and the .28 in the truggy is great.
I haven't leaned the ninja in the truggy simply because I don't need that
much power yet. Running a little fat. 210 degrees. or so.
This is not the JX model b ut the earlier Rossi built model.
Hard to find.
I also have a Ninja and a Werks for my Truggy.
The Werks motor just got rebuilt, and the .28 in the truggy is great.
I haven't leaned the ninja in the truggy simply because I don't need that
much power yet. Running a little fat. 210 degrees. or so.
#8
Clockwork Modified Werk's B6 is my suggestion..... very fast, very good on fuel and excellent service and warranty !
#11
Tech Master
iTrader: (20)
http://www.clockworkracingengines.com/
my friend u really wont look back
and the service from Neal aka Maximo and John aka xc7
what else could u ask for
they will bend over to help ya needs
Hope this helps ya
#14
RB Buggy 10 It idles great. Has Lots of power and is Very Reliable
#15
Tech Rookie
RB10
go with the RB ive been running them in my 3 race
cars for 5 years now they have plenty of power
and easy to tune good luck
cars for 5 years now they have plenty of power
and easy to tune good luck