FS: ARTR Brushless Revo/Summit+TONS of spares
11-22-2010, 01:22 PM
#1
FS: ARTR Brushless Revo/Summit+TONS of spares
I'm not even sure where to start this...haha
So I bought a brushless E-Revo that was setup for racing with the truggies and it did so quite well. But I wanted to have a more versatile truck so I began to modify it. I added the Summit rockers and springs, replaced the racing tires with the nitro Revo wheels and tires(wider and taller) and it was a great truck. But it was really lacking in hill climbs and rough terrain with the center diff and open diffs front and rear. Thats when I decided to convert it partially into a Summit. I replaced the center diff and rear diff with spools. Then I replaced the front diff with the Summit selectable locker diff and added the servo. I also added the front and rear lit bumpers. To top it all off I waterproofed the ESC. Now it is the ultimate offroad rig.
Installed on truck:
Waterproofed Flux(Castle) ESC and 2200KV motor
Dual high torque steering servos
Summit front selectable locker with waterproof Traxxas micro servo
Front and rear Summit bumpers with LED lighting
Front and Rear Summit Long Travel Rockers and Springs
4 Stock Brushless Revo Rims and Tires
4 Racing tires on solid rims
4 Nitro Revo rims and tires
E-Revo Prographics body
Truggy body for racing
Front and Rear Traxxas Tubes aluminum push rods
Integy aluminum skid plate
Front RPM arms, one side clearanced for the Summit diff
Rear RPM Truetrack arms
Rear steel driveshafts
Included Spare Parts:
Stock front and rear bumpers
Stock rear wing
Stock front and rear E-revo gear cases
Stock push rods
P2 and P3 rockers
3 sets of springs(silver and purple and stock)
Spare Front RPM arms
Spare rear Truetrack RPM arms
Spur gear
Front steel driveshafts
Center diff, front and rear diffs
Honestly I'm sure there is more stuff that I'm missing and I will include whatever other spare parts I find laying around for this thing.
Basically all you will need to do is provide your radio system and its RTR. You will need a 3 channel radio to run the front locker. I can include my 4 Channel Traxxas 2.4GHz radio for an additional $100(that is non-negotiable)
Price: $575 shipped to the lower 48 state. I am not looking for any trades and at this point I am not going to split it up. Price isn't firm...but its still $75 cheaper than a new Brushless E-Revo that doesn't come with anything extra.
So I bought a brushless E-Revo that was setup for racing with the truggies and it did so quite well. But I wanted to have a more versatile truck so I began to modify it. I added the Summit rockers and springs, replaced the racing tires with the nitro Revo wheels and tires(wider and taller) and it was a great truck. But it was really lacking in hill climbs and rough terrain with the center diff and open diffs front and rear. Thats when I decided to convert it partially into a Summit. I replaced the center diff and rear diff with spools. Then I replaced the front diff with the Summit selectable locker diff and added the servo. I also added the front and rear lit bumpers. To top it all off I waterproofed the ESC. Now it is the ultimate offroad rig.
Installed on truck:
Waterproofed Flux(Castle) ESC and 2200KV motor
Dual high torque steering servos
Summit front selectable locker with waterproof Traxxas micro servo
Front and rear Summit bumpers with LED lighting
Front and Rear Summit Long Travel Rockers and Springs
4 Stock Brushless Revo Rims and Tires
4 Racing tires on solid rims
4 Nitro Revo rims and tires
E-Revo Prographics body
Truggy body for racing
Front and Rear Traxxas Tubes aluminum push rods
Integy aluminum skid plate
Front RPM arms, one side clearanced for the Summit diff
Rear RPM Truetrack arms
Rear steel driveshafts
Included Spare Parts:
Stock front and rear bumpers
Stock rear wing
Stock front and rear E-revo gear cases
Stock push rods
P2 and P3 rockers
3 sets of springs(silver and purple and stock)
Spare Front RPM arms
Spare rear Truetrack RPM arms
Spur gear
Front steel driveshafts
Center diff, front and rear diffs
Honestly I'm sure there is more stuff that I'm missing and I will include whatever other spare parts I find laying around for this thing.
Basically all you will need to do is provide your radio system and its RTR. You will need a 3 channel radio to run the front locker. I can include my 4 Channel Traxxas 2.4GHz radio for an additional $100(that is non-negotiable)
Price: $575 shipped to the lower 48 state. I am not looking for any trades and at this point I am not going to split it up. Price isn't firm...but its still $75 cheaper than a new Brushless E-Revo that doesn't come with anything extra.
Last edited by mschaffer66; 11-23-2010 at 02:16 PM.
11-23-2010, 02:17 PM
#2
Top...lets see this thing find a new home 
11-24-2010, 06:01 AM
#4
No thanks. I want to sell it as a whole
11-27-2010, 08:25 AM
#6
To the top
$500 shipped to the lower 48. Everything included.
$500 shipped to the lower 48. Everything included.
11-30-2010, 08:49 AM
#7
top
12-29-2010, 05:56 PM
#8
Bump for the new year. Buy yourself something nice to start it off right 
01-03-2011, 08:54 PM
#9
top
01-13-2011, 07:37 PM
#10
top
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
