Cuebulon

Do they have any accessible coupons or is it prwtty much the price listed

Cuebulon

What pinions are suggested for a 1900 in this car?

turtle189

15-16

Bburns

iTrader: (4)

16/44

am

Hi. Anyone watched the video by Drake to set gearmesh on the MBX7R ECO? Anyone know the partnumber to use a clutch like what he has on his car in the vid?

Bburns

iTrader: (4)

He uses a Tekno elektri-clutch. Not made anymore. Losi makes one but doesn't fit as good.

ffpm46

iTrader: (179)

Hello all decide to get back into racing building this car with a Tekin RX8 1900 combo.

What gearing works the best for an all round setup. The stock set up 14/46 or 15-16/44?

Track I will race at is in S Florida Mills Pond and Coral Springs. Mills is large, Springs Medium.

Any advise for build or setup would be appriciated!

Plan on running two 2S in series.

Thanks again

Randy_Pike

iTrader: (6)

You should carry a 14-16. That should cover you on 95% of typical 1/8 tracks.

rregl0612

iTrader: (33)

Subscribed

rregl0612

iTrader: (33)

Looking to pull the trigger in a new ebuggy this year, narrowed my choices to this and the xray.

Does anyone here know if the newer kits will include the updated diffs and other bits that are coming out?

ffpm46

iTrader: (179)

New diffs..... was there a problem with the diffs when this buggy was released?

rregl0612

iTrader: (33)

Not to my knowledge, from what I've read they are larger capacity. I was mainly curious

Bburns

iTrader: (4)

No problem with the old diffs. The new diffs were developed to hold more oil and keep temps down during long mains.

ffpm46

iTrader: (179)

Cool, so no issues for eco mains! Are the eco kits coming with the new diffs?

1/8 IC Fan

iTrader: (102)

No i do not thonk kits have the new diffs, i am sure they will be part of the next MBX7 evolution.

There is absolutely nothing wring with the stock diffs.