2014 LAS VEGAS INTERNATIONAL INDOOR CHAMPIONSHIPS "IIC" PRESENTED BY SCOTTY ERNST
09-25-2014, 12:06 PM
#331
The Tekin Spec GT class will use a 4.7 FDR and approximately 10 degrees of motor timing on the endbell. Genuine Tekin Flex Jacket wire will be provided again and must be used in the class. Shortening of the wires is allowed, sensor harnesses will be provided. Timing will be set to match all motors kv at the factory to assure a level playing field to maximize the closeness of racing.
If you have any questions, either Randy or myself will answer them to the best of our ability.
If you have any questions, either Randy or myself will answer them to the best of our ability.
09-25-2014, 12:10 PM
#332
Tech Adept
Thanks! Really getting pumped for some Spec racing 
09-25-2014, 12:12 PM
#333
In regards to late signups for a class, as soon as you know you want to add a class let us know or add the class on the site. My fear, even though it shouldn't be my fear, is if a class becomes full you might not be able to run it. So let us know as soon as possible.
? You kidding me? I'll have two 40mm fans facing rearward for turbo boost down the straight. Just listen for the whining when they spool up! 
09-25-2014, 03:02 PM
#337
Nobody needed a fan last year to be honest. I had guys removing them to increase their finish voltage at the end of the run.
Hottest motor temp recorded last year via data logging was 160f. No fan, Tq run.
Hottest motor temp recorded last year via data logging was 160f. No fan, Tq run.
09-25-2014, 07:07 PM
#338
09-25-2014, 10:02 PM
#339
For the 10th anniversary of the International Indoor Championships we are proud to announce that JACO will be the foam tire of choice for the World GT and Expert World GT classes.
JACO for years was a staple in the racing world and is now produced by BSR Racing Tires. You can expect the highest quality, you have come to expect in the BSR Racing Tires line, now available in the JACO line produced by BSR Racing Tires. The JACO WGT part number is JAC2100B front and JAC2110B rear. Look for them to be available in September at your local track or hobby shop.
We look forward to having JACO and BSR Racing Tires be part of the International Indoor Championships.
JACO for years was a staple in the racing world and is now produced by BSR Racing Tires. You can expect the highest quality, you have come to expect in the BSR Racing Tires line, now available in the JACO line produced by BSR Racing Tires. The JACO WGT part number is JAC2100B front and JAC2110B rear. Look for them to be available in September at your local track or hobby shop.
We look forward to having JACO and BSR Racing Tires be part of the International Indoor Championships.
Have not seen the JAC2100B and JAC2110B foam tires yet.
Will the wheel offsets of these new JACO WGT tires be the same as the old white ones. Would be nice to be able to setup the widths of my WGT cars prior to arriving at Vegas.
Thanks.
Bill
09-26-2014, 06:03 PM
#341
Tech Fanatic
help entering the race
can someone let me know how I can enter another racer running the same classes as I've already entered under my log-in. the other racer doesn't have a paypal account. HELP HELP
thanks
bill
thanks
bill
09-26-2014, 11:12 PM
#342
Maybe Kraig can chime in to clarify?
Bill
09-26-2014, 11:42 PM
#343
Tech Master
iTrader: (15)
Early reports of the spec tire(touring car) show that the glue job on these premounts are horrible. I witnessed a fellow racer today have three of the four tires come unglued after two packs! Anybody else see the same trend or is this an isolated problem.
Last edited by trigger; 09-27-2014 at 12:18 AM.
09-27-2014, 04:53 AM
#345
Tech Master
iTrader: (44)
There is no conspiracy to advertise one wheel and send another. It's a simple case of we didn't have enough time to have the white rims made and shipped to us for assembly. Using the black rims that we already had allowed us to make the tires, which have already shipped and on their way to Las Vegas
Enjoy the race everyone.
Monti