Did I forget anything?
#1
Did I forget anything?
Mugen MBX6T M-Spec 1/8 Scale Off-Road Competition Race Roller Truggy
Hitec HS-7955TG Ultra Torque Titanium Gear Digital Servo
Airtronics M11X FHSS-3 2.4Ghz Radio System
Werks Racing Team Line B5 .21 Off-Road Competition Buggy Engine w/2010 Carburetor (Turbo Plug)
Werks Racing 2057 One Piece Tuned Pipe w/Smooth Flow Manifold
O'Donnell #97T 1/8 Off-Road Medium Turbo Glow Plug
Hobbico Hot-Shot 2 Standard
OFNA Truggy Starter Starter Box
Hitec HS-7955TG Ultra Torque Titanium Gear Digital Servo
Airtronics M11X FHSS-3 2.4Ghz Radio System
Werks Racing Team Line B5 .21 Off-Road Competition Buggy Engine w/2010 Carburetor (Turbo Plug)
Werks Racing 2057 One Piece Tuned Pipe w/Smooth Flow Manifold
O'Donnell #97T 1/8 Off-Road Medium Turbo Glow Plug
Hobbico Hot-Shot 2 Standard
OFNA Truggy Starter Starter Box
#2
does the werks b5 include the intructions ? for break in etc
#3
it looks like you have everything accept the tires.
#5
Mugen MBX6T M-Spec 1/8 Scale Off-Road Competition Race Roller Truggy
Hitec HS-7955TG Ultra Torque Titanium Gear Digital Servo
Airtronics M11X FHSS-3 2.4Ghz Radio System
Werks Racing Team Line B5 .21 Off-Road Competition Buggy Engine w/2010 Carburetor (Turbo Plug)
Werks Racing 2057 One Piece Tuned Pipe w/Smooth Flow Manifold
O'Donnell #97T 1/8 Off-Road Medium Turbo Glow Plug
Hobbico Hot-Shot 2 Standard
OFNA Truggy Starter Starter Box
Hitec HS-7955TG Ultra Torque Titanium Gear Digital Servo
Airtronics M11X FHSS-3 2.4Ghz Radio System
Werks Racing Team Line B5 .21 Off-Road Competition Buggy Engine w/2010 Carburetor (Turbo Plug)
Werks Racing 2057 One Piece Tuned Pipe w/Smooth Flow Manifold
O'Donnell #97T 1/8 Off-Road Medium Turbo Glow Plug
Hobbico Hot-Shot 2 Standard
OFNA Truggy Starter Starter Box
lets see. Assuming you have 2 servos and i have no idea what a hobico hot shot is i would say:
glow ignitor with charger, reciever battery and transmitter batter, charger, fuel, wrenches, air filter oil, after run oil, nitro blast/brake cleaner, shock oil, diff oil, screw set, tunning screw driver, wheel and glo plug wrench, thread lock, heat gun, temp gun, fuel bottle, grease, needle nose pliers, channel locks.
you will definitley need some good tools and some extra screws.
#6
#7
my bad. the mspec comes with a glo plug and wheel/flywheel wrench.
and tires.
and tires.
#8
lets see. Assuming you have 2 servos and i have no idea what a hobico hot shot is i would say:
glow ignitor with charger, reciever battery and transmitter batter, charger, fuel, wrenches, air filter oil, after run oil, nitro blast/brake cleaner, shock oil, diff oil, screw set, tunning screw driver, wheel and glo plug wrench, thread lock, heat gun, temp gun, fuel bottle, grease, needle nose pliers, channel locks.
you will definitley need some good tools and some extra screws.
glow ignitor with charger, reciever battery and transmitter batter, charger, fuel, wrenches, air filter oil, after run oil, nitro blast/brake cleaner, shock oil, diff oil, screw set, tunning screw driver, wheel and glo plug wrench, thread lock, heat gun, temp gun, fuel bottle, grease, needle nose pliers, channel locks.
you will definitley need some good tools and some extra screws.
Thanks!
#10
pretty much good to go. Just make sure you get some air fliter oil and after run oil
don't forget zip ties and throttle return bands!!
#11
#12
Guess I should have asked first eh, that's what I get.
#13
does the werks b5 include the intructions ? for the break in etc?
cause when i read the, specs of it it said there wasnt any . and is a turbo head engine harder to tune more finky to tune?
i know the mugen came with, wheels i dint know if it came with tires.
cause when i read the, specs of it it said there wasnt any . and is a turbo head engine harder to tune more finky to tune?
i know the mugen came with, wheels i dint know if it came with tires.
#14
Break-in steps are on page 3.
#15
Great engine. Full RC-Tech thread is here, http://www.rctech.net/forum/nitro-of...ngine-208.html
Break-in steps are on page 3.
Break-in steps are on page 3.
ok thanks im looking for a new engine, and was takeing a look at the werks engine i never tuned a turbo head though.